• AASHTO PP 55-06 (2012)

AASHTO PP 55-06 (2012)

Standard Practice for Overcoating Field Test Program for Evaluating Protective Coatings on Existing Bridges or Salvaged Beams

American Association of State and Highway Transportation Officials, 2009

Publisher: AASHTO

File Format: PDF

$22.00$44.00


Pages:10

File Size:1 file , 790 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

This field testing program has been established to provide the end user with test results which can be used to make performance judgments on one-, two-, or three-coat systems for maintenance overcoating previously painted steel structures.

This field testing program is intended to apply to maintenance overcoating, herein defined as the practice of cleaning and painting over an existing coating which is largely intact but has areas of corrosion or peeling paint in need of repair. This practice usually includes the spot preparation of rusted or degraded areas, feathering edges of existing paint, power washing the entire structure, priming bare or repaired areas, applying an intermediate coat over the repaired areas or entire structure, and the optional step of applying a full topcoat over the entire structure, or a similar variation of these procedures.

This field testing program evaluates the performance of protective coatings applied to existing painted steel surfaces with various degrees of surface preparation and condition, including, surfaces hand tool cleaned (SSPC SP 2), surfaces cleaned by conventional power tools (SSPC SP 3), surfaces power tool cleaned to bare metal (SSPC SP 15), and industrial blast (SSPC SP 14).

The coating materials in the field testing program are applied to previously painted steel surfaces of existing bridges or salvaged bridge beams after proper surface preparations, as described herein, and thereafter evaluated annually, unless otherwise agreed, for a period of three years.

All of the elements of this field testing program shall be performed in accordance with applicable local, state, and national regulations governing environmental and worker protection. Specific references to material, environmental, and worker protection requirements are not necessarily made in this document since these regulations are widely known and compliance with these regulations is standard practice in the bridge painting industry.

More AASHTO standard pdf

AASHTO T 119M/T 119-05

AASHTO T 119M/T 119-05

Standard Method of Test for Slump of Hydraulic Cement Concrete (ASTM Designation: C143/C143M-03)

$20.00 $40.00

AASHTO T 158-05

AASHTO T 158-05

Standard Method of Test for Bleeding of Concrete (ASTM Designation: C232-99)

$60.00 $120.00

AASHTO T 155-05

AASHTO T 155-05

Standard Method of Test for Water Retention by Concrete Curing Materials (ASTM Designation: C156-03)

$60.00 $120.00

AASHTO SHSP-2

AASHTO SHSP-2

AASHTO Strategic Highway Safety Plan - A Comprehensive Plan to Substantially Reduce Vehicle-Related Fatalities and Injuries on the Nation's Highways

$10.00 $20.00