• AASHTO T 102-83 (2004)

AASHTO T 102-83 (2004)

Standard Method of Test for Spot Test of Asphaltic Materials

American Association of State and Highway Transportation Officials, 1983

Publisher: AASHTO

File Format: PDF

$60.00$120.00


Pages:5

File Size:1 file , 1.1 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

This method of test is applicable only to asphaltic products derived from petroleum and should not be applied to natural asphalts containing nonbituminous matter insoluble in xylene.

Materials, which by use of standard solvent are classed as positive, may be further tested to determine their degree of positiveness by means of their “xylene equivalent.” The xylene equivalent shall be the lowest percentage by volume of xylene in a solvent composed of xylene and standard naphtha or xylene and normal heptane, as specified, which produces a “negative spot” for the material in question. These shall be known as the naphtha-xylene equivalent and heptane-xylene equivalent, respectively. The percentage of xylene in the solvents shall be stated in even 5.0-percent increments. When neither xylene equivalent is specified, the standard naphtha only shall be used as the solvent.

More AASHTO standard pdf

AASHTO M 176M/M 176-17

AASHTO M 176M/M 176-17

Standard Specification for Porous Concrete Pipe (ASTM Designation C 654M-05a and C 654-05)

$27.00 $54.00

AASHTO M 178M/M 178-17

AASHTO M 178M/M 178-17

Standard Specification for Concrete Drain Tile (ASTM Designation C 412M-15 and C 412-15)

$30.00 $61.00

AASHTO T 23-18

AASHTO T 23-18

Standard Method of Test for Making and Curing Concrete Test Specimens in the Field (ASTM Designation: C31-15a)

$30.00 $61.00

AASHTO M 31M/M 31-17

AASHTO M 31M/M 31-17

Standard Specification for Deformed and Plain Carbon and Low-Alloy Steel Bars for Concrete Reinforcement (ASTM Designation: A615/A615M-12)

$30.00 $61.00