• AASHTO T 313-09

AASHTO T 313-09

Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

American Association of State and Highway Transportation Officials, 2009

Publisher: AASHTO

File Format: PDF

$27.00$55.00


Pages:21

File Size:1 file , 1.3 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

This test method covers the determination of the flexural creep stiffness or compliance of asphalt binders by means of a bending beam rheometer. It is applicable to material having a flexural stiffness value from 20 MPa to 1 GPa (creep compliance values in the range of 50 nPa–1 to 1 nPa–1) and can be used with unaged material or with material aged using AASHTO T 240 (RTFOT) and/or R 28 (PAV). The test apparatus is designed for testing within the temperature range from –36 to 0°C.

Test results are not valid for beams of asphalt binder that deflect more than 4 mm, or less than 0.08 mm, when tested in accordance with this method.

More AASHTO standard pdf

AASHTO M 279-03

AASHTO M 279-03

Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric (ASTM Designation: A116-00)

$25.00 $50.00

AASHTO T 323-03 (2020)

AASHTO T 323-03 (2020)

Standard Method of Test for Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete

$39.00 $78.00

AASHTO T 110-03 (2020)

AASHTO T 110-03 (2020)

Standard Method of Test for Moisture or Volatile Distillates in Hot-Mix Asphalt (HMA) (ASTM Designation: D 1461-85 (2006))

$30.00 $61.00

AASHTO R 13-03

AASHTO R 13-03

Standard Recommended Practice for Conducting Geotechnical Subsurface Investigations (ASTM Designation: D420-98)

$25.00 $50.00