Your shopping cart is empty!
American Association of State and Highway Transportation Officials, 2021
Publisher: AASHTO
File Format: PDF
$48.00$97.00
Pages:29
File Size:1 file , 3.8 MB
Note:This product is unavailable in Ukraine, Russia, Belarus
This test method covers procedures for preparing and testing both laboratory-compacted and field-cored asphalt mixture specimens to determine the damage characteristic curve and fatigue analysis parameters via the direct tension cyclic fatigue test using the asphalt mixture performance tester (AMPT).
This standard is intended for dense-graded mixtures with nominal maximum aggregate size less than or equal to 19.0 mm (0.75 in.). Mixtures with a nominal maximum aggregate size greater than 19.0 mm (0.75 in.) should be tested following AASHTO TP 107.
Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
$48.00 $97.00
Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
$25.00 $50.00
Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (ASTM Designation: C127-12)
$30.00 $61.00
Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
$39.00 $78.00
Guide Specifications for LRFD Seismic Bridge Design, 2nd Edition, 2012 Interim Revisions
$145.00 $290.62
AASHTO LRFD Movable Highway Bridge Design Specifications, 2012 Interim Revisions
$128.00 $257.98