ACI MCP712

Includes Index of complete Manual of Concrete Practice

Contents: Part 7-ACI 543R-00 to ACI ITG-8R-10

543R-00 (Reapproved 2005) Design, Manufacture, and Installation of Concrete Piles

544.1R-96 (Reapproved 2009) Report on Fiber Reinforced Concrete

544.2R-89 (Reapproved 2009) Measurement of Properties of Fiber Reinforced Concrete

544.3R-08 Guide for Specifying, Proportioning, and Production of Fiber-Reinforced Concrete

544.4R-88 (Reapproved 2009) Design Considerations for Steel Fiber Reinforced Concrete

544.5R-10 Report on the Physical Properties and Durability of Fiber-Reinforced Concrete

546R-04 Concrete Repair Guide

546.2R-10 Guide to Underwater Repair of Concrete

546.3R-06 Guide for the Selection of Materials for Repair of Concrete

548.1R-09 Guide for the Use of Polymers in Concrete

548.3R-09 Report on Polymer-Modified Concrete

548.4-93 (Reapproved 1998) Standard Specification for Latex-Modified Concrete (LMC) Overlays

548.5R-94 (Reapproved 1998) Guide for Polymer Concrete Overlays

548.7-04 Test Method for Load Capacity of Polymer Concrete Underground Utility Structures

548.8-07 Specification for Type EM Polymer Overlay for Bridge and Parking Deck Construction

548.9-08 Specification for Type ES Polymer Overlay for Bridge and Parking Garage Structures

548.10-10 Specification for Type MMS (Methyle Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage Decks

549R-97 (Reapproved 2009) Report on Ferrocement

549.1R-93 (Reapproved 2009) Guide for the Design, Construction, and Repair of Ferrocement

549.2R-04 Report on Thin Reinforced Cementitious Products

549.3R-09 Report on Glass Fiber-Reinforced Concrete Premix

550.1R-09 Emulating Cast-in-Place Detailing for Seismic Design of Precast Concrete Structures

551.1R-05 Tilt-Up Concrete Construction Guide

551.2R-10 Design Guide for Tilt-Up Concrete Panels

555R-01 Removal and Reuse of Hardened Concrete

ITG-4.1-07 Specification for High-Strength Concrete for Seismic Applications

ITG-4.2R-06 Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications

ITG-4.3R-07 Report on Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications

ITG-5.1-07 Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing and Commentary

ITG-5.2-09 Requirements for Design of a Special Unbonded Post-Tensioned Precast Shear Wall Satisfying ACI ITG-5.1 (ACI ITG-5.2-09) and Commentary

ITG-6R-10 Design Guide for the Use of ASTM A1035/A1035M Grade 100 (690) Steel Bars for Structural Concrete

ITG-7.1-09 Specification for Tolerances for Precast Concrete

ITG-8R-10 Report on Performance-Based Requirements for Concrete