• ASTM A334/A334M-04a

ASTM A334/A334M-04a

Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

ASTM International, 05/01/2004

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:01/05/2004

Pages:6

File Size:1 file , 48 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.

1.2 Supplementary Requirement S1 of an optional nature is provided. This shall apply only when specified by the purchaser.

Note 1 - For tubing smaller than 1/2 in. [12.7 mm] in outside diameter, the elongation values given for strip specimens in Table 1 shall apply. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter and with a wall thickness under 0.015 in. [0.4 mm].

1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

More ASTM standard pdf

ASTM F1894-98(2003)

ASTM F1894-98(2003)

Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness

$29.00 $58.00

ASTM F2527-10

ASTM F2527-10

Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)

$29.00 $58.00

ASTM F2244-10

ASTM F2244-10

Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft

$25.00 $50.00