• ASTM A737/A737M-09

ASTM A737/A737M-09

Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

ASTM International, 10/01/2009

Publisher: ASTM

File Format: PDF

$26.00$52.00


Published:01/10/2009

Pages:3

File Size:1 file , 67 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers high-strength low-alloy steel plates for service in welded pressure vessels and piping components.

1.2 This material is particularly intended for piping and pressure vessel applications where high strength and improved toughness are required.

1.3 Two grades, designated B and C, are covered by this specification. Grade B provides a minimum yield strength of 50 ksi [345 MPa]. Grade C provides a minimum yield strength of 60 ksi [415 MPa].

1.4 The maximum thickness of plates is limited only by the capacity of the chemical composition and heat treatment to meet the specified mechanical property requirements; however, current practice normally limits the maximum thickness to 4 in. [100 mm] for each grade.

1.5 Grade C in the as-rolled condition is sensitive to cracking during flame cutting, transit, and handling, particularly in thicknesses over 2 in. [50 mm]. Plates should not be shipped in the as-rolled condition only except by mutual agreement between the manufacturer and the purchaser.

1.6 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

More ASTM standard pdf

ASTM D5373-14

ASTM D5373-14

Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

$33.00 $67.00

ASTM D3381-05

ASTM D3381-05

Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

$26.00 $52.00

ASTM A751-14

ASTM A751-14

Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

$30.00 $60.00

ASTM B651-83(2006)

ASTM B651-83(2006)

Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope

$26.00 $52.00