• ASTM A859/A859M-95(1999)

ASTM A859/A859M-95(1999)

Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

ASTM International, 09/10/1999

Publisher: ASTM

File Format: PDF

$25.00$50.00


Published:10/09/1999

Pages:4

File Size:1 file , 39 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers requirements for low-carbon age-hardening nickel-copper-chromium-molybdenum-columbium alloy steel forgings for pressure vessel components.

1.2 Forgings under this specification are available in two classes as follows:

1.2.1 Class 1 -Normalized-and-precipitation-heat-treated, providing a minimum yield strength of 55 ksi [380 MPa] and a minimum tensile strength of 65 ksi [450 MPa].

1.2.2 Class 2 -Quenched-and-precipitation-heat-treated, providing a minimum yield strength of 65 ksi [450 MPa] and a minimum tensile strength of 75 ksi [MPa].

1.3 Although the material is readily weldable, welding procedures are of fundamental importance and must be such as not to affect adversely the properties of the material, especially in the heat-affected zone. It is presupposed that welding procedures will be suitable for the material being welded.

1.4 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.

1.5 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.6 This specification is expressed in both inch-pound and SI units. However, unless the order specifies the applicable "M" specification designation [SI units], the material shall be furnished to inch-pound units.

More ASTM standard pdf

ASTM F3116/F3116M-18e1

ASTM F3116/F3116M-18e1

Standard Specification for Design Loads and Conditions

$44.00 $89.00

ASTM C1433-20

ASTM C1433-20

Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

$46.00 $92.00

ASTM C1440-21

ASTM C1440-21

Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

$24.00 $48.00

ASTM E1316-20

ASTM E1316-20

Standard Terminology for Nondestructive Examinations

$43.00 $86.00