• Your shopping cart is empty!

  • ASTM A861-04(2017)

ASTM A861-04(2017)

Standard Specification for High-Silicon Iron Pipe and Fittings

ASTM International, 10/01/2017

Publisher: ASTM

File Format: PDF

$49.00$98.00


1.1 This specification covers high-silicon iron pipe and pipe fittings intended for corrosion-resistant service for both above- and below-grade construction.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 Pipe and pipe fittings shall be the no-hub (MJ) or the hub and plain end design.
1.4 Pipe and pipe fittings shall be of the sizes specified in Table 1 and Table 2 and Figs. 1-71 or other sizes that shall be permitted to conform to the requirements given herein.
TABLE 1 Tolerances for High-Silicon Iron Hub/Plain-End Pipe
Note 1: 1 in. = 25.4 mm.
Size, in. Wall Thickness, in. ID Tolerance, in. OD Tolerance, in.  2 ±1/32  ±1/32  ±1/32   3 ±1/32  ±1/32  ±1/32   4 ±1/32  ±1/32  ±1/32   6 ±1/32  ±1/32  ±³/64   8 ±1/32  ±1/8   ±1/8   10 ±1/8   ±1/8   ±1/8   12 ±1/8   ±1/8   ±1/8   15 ±1/8   ±1/8   ±1/8  
TABLE 2 Tolerances for High-Silicon Iron Fittings
Note 1: 1 in. = 25.4 mm.
Size, in. ID Tolerance,
in. OD Tolerance,
in. Stop Lug Depth
Tolerance, in.    11/2  ±1/16  ±1/16  ±1/16     11/2 × 11/2  ±1/16  ±1/16  ±1/16     2 ±1/16  ±1/16  ±1/16     2 × 11/2  ±1/16  ±1/16  ±1/16     2 × 2 ±1/16  ±1/16  ±1/16     3 ±1/16  ±1/16  ±1/16     3 × 11/2  ±1/16  ±1/16  ±1/16     3 × 2 ±1/16  ±1/16  ±1/16     3 × 3 ±1/16  ±1/16  ±1/16     4 ±1/16  ±1/16  ±1/16     4 × 11/2  ±1/16  ±1/16  ±1/16     4 × 2 ±1/16  ±1/16  ±1/16     4 × 3 ±1/16  ±1/16  ±1/16     4 × 4 ±1/16  ±1/16  ±1/16 
TABLE 3 Chemical Composition Element Composition, Weight % Grade 1 Grade 2 Carbon  0.65-1.10  0.75-1.15 Manganese  1.50 max  1.50 max Silicon 14.20-14.75 14.20-14.75 Chromium  0.50 max  3.25-5.00 Molybdenum  0.50 max  0.40-0.60 Copper  0.50 max  0.50 max
FIG. 1 No-Hub Pipe (MJ)
No-Hub Pipe (MJ)No-Hub Pipe (MJ)
Size, in. J, in. F, in. t, in. 11/2  2³/16 (2.19) 84 5/16  2  211/16 (2.69) 84 5/16  3  349/64 (3.77) 84 5/16  4  449/64 (4.77) 84 5/16 
Note 1: 1 in. = 25.4 mm.
FIG. 2 Quarter Bends
Quarter BendsQuarter Bends
Size, in. D, in. ID, in. OD, in. Stop Lug
Depth (P), in. 11/2  41/4  11/2  2³/16 (2.19) 11/32  2 41/2  2 25/8 (2.62) 11/32  2 × 11/2  4³/16 × 41/2  2 × 11/2  25/8 × 2³/16  11/32  3 5 3 3³/4 (3.75) 11/32  4 51/2  4 4³/4 (4.75) 11/32 
Note 1: 1 in. = 25.4 mm.
FIG. 3 Sixth Bends
Sixth BendsSixth Bends
Size, in. D, in.   ID, in.   OD, in. Stop Lug
Depth (P), in.    11/2     3    11/2     2³/16  11/32     2    31/4     2    25/8  11/32     3    31/2     3    3³/4  11/32     4    3³/4     4    4³/4  11/32 
Note 1: 1 in. = 25

More ASTM standard pdf

ASTM A90/A90M-13

ASTM A90/A90M-13

Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

$30.00 $60.00

ASTM D7348-08

ASTM D7348-08

Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

$30.00 $60.00

ASTM D7098-08

ASTM D7098-08

Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

$30.00 $60.00

ASTM E1522-93(2013)

ASTM E1522-93(2013)

Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware

$25.00 $50.00