• ASTM A909/A909M-06

ASTM A909/A909M-06

Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

ASTM International, 12/01/2006

Publisher: ASTM

File Format: PDF

$26.00$52.00


Published:01/12/2006

Pages:4

File Size:1 file , 76 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers wrought, microalloyed carbon steel forgings for industrial use. Microalloyed steels develop their properties by the addition of small amounts of microalloying elements such as vanadium, columbium, titanium, or molybdenum. The properties may be influenced also by control of the hot working process and temperature and by control of the subsequent cooling rate.

1.2 The forgings shall be furnished to chemical composition and mechanical property requirements as specified herein. Chemical composition is based on standard carbon steel grades modified to include microalloying elements. Strength level is specified based on desired mechanical properties in the forgings. Depending on the forging process, different strength classes may be attainable from a single chemical composition. Conversely, mechanical properties of a given strength class may be achieved using different chemical compositions. The manufacturer should be consulted if development of chemical composition is necessary.

1.3 For the purpose of this specification, forgings with maximum section thickness of 4 in. [100 mm] are to be considered.

1.4 Supplementary Requirements S1 to S8 are provided for use when additional controls or requirements are desired. These shall apply only when specified on the purchase order.

1.5 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as standard. Within the text and tables, SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

1.6 Unless the order specifies the applicable "M" specification designation, the material shall be furnished to the inch-pound units.

More ASTM standard pdf

ASTM F1876-98

ASTM F1876-98

Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications

$25.00 $50.00

ASTM C1002-14

ASTM C1002-14

Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

$30.00 $60.00

ASTM E463-14

ASTM E463-14

Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrometry

$26.00 $52.00

ASTM D3159-10

ASTM D3159-10

Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

$30.00 $60.00