• ASTM A996/A996M-03

ASTM A996/A996M-03

Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

ASTM International, 04/10/2003

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:10/04/2003

Pages:5

File Size:1 file , 43 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers rail-steel and axle-steel bars for concrete reinforcement. Three types of product are included, designated with a "rail symbol," and an "R" for bars made of rail-steel and with an "A" for bars made of axle-steel. The standard sizes and dimensions of deformed bars and their number designations are given in Table 1. All sizes and grades of all types may not be readily available; manufacturers should be consulted to verify availability.

1.2 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of the specification.

1.3 Type "rail symbol" and Type R are of two minimum yield levels, namely 50 000 psi [350 MPa] and 60 000 psi [420 MPa] designated as Grade 50 [350] and Grade 60 [420], respectively. Type A is of two minimum yield levels, namely 40 000 psi [280 MPa] and 60 000 psi [420 MPa] designated as Grade 40 [280] and Grade 60 [420], respectively.

1.4 The weldability of the steel is not a requirement of this specification.

1.5 This specification is applicable for orders in either inch-pound units (Specification A 996) or SI units (Specification A 996M).

1.6 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM STP 1310-97

ASTM STP 1310-97

Tribology of Hydraulic Pump Testing

$125.00 $250.72

ASTM F1267-91(1997)

ASTM F1267-91(1997)

Standard Specification for Metal, Expanded, Steel

$29.00 $58.00

ASTM F1792-97

ASTM F1792-97

Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

$25.00 $50.00

ASTM D4391-93a(2000)

ASTM D4391-93a(2000)

Standard Terminology Relating to The Burning Behavior of Textiles

$25.00 $50.00