• ASTM B338-05a

ASTM B338-05a

Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

ASTM International, 03/01/2005

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:01/03/2005

Pages:8

File Size:1 file , 100 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers the requirements for 23 grades of titanium and titanium alloy tubing intended for surface condensers, evaporators, and heat exchangers, as follows:

1.1.1 Grade 1Unalloyed titanium,

1.1.2 Grade 2Unalloyed titanium,

1.1.3 Grade 3Unalloyed titanium,

1.1.4 Grade 7Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.5 Grade 9Titanium alloy (3 % aluminum, 2.5 % vanadium),

1.1.6 Grade 11Unalloyed titanium plus 0.12 to 0.25 % palladium,

1.1.7 Grade 12Titanium alloy (0.3 % molybdenum, 0.8 % nickel),

1.1.8 Grade 13Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.9 Grade 14Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.10 Grade 15Titanium alloy (0.5 % nickel, 0.05 % ruthenium),

1.1.11 Grade 16Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.12 Grade 17Unalloyed titanium plus 0.04 to 0.08 % palladium,

1.1.13 Grade 18Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,

1.1.14 Grade 26Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.15 Grade 27Unalloyed titanium plus 0.08 to 0.14 % ruthenium,

1.1.16 Grade 28Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,

1.1.17 Grade 30Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.18 Grade 31Titanium alloy (0.3 % cobalt, 0.05 % palladium),

1.1.19 Grade 33Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.20 Grade 34Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),

1.1.21 Grade 35Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),

1.1.22 Grade 36Titanium alloy (45 % niobium), and

1.1.23 Grade 37Titanium alloy (1.5 % aluminum).

1.2 Tubing covered by this specification shall be heat treated by at least a stress relief as defined in .

1.3 &inch-pound-units;

More ASTM standard pdf

ASTM F1488-14

ASTM F1488-14

Standard Specification for Coextruded Composite Pipe

$32.00 $65.00

ASTM D3426-97(2004)

ASTM D3426-97(2004)

Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves

$26.00 $52.00

ASTM D7101-08

ASTM D7101-08

Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

$30.00 $60.00

ASTM A564/A564M-04

ASTM A564/A564M-04

Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

$30.00 $60.00