1.1 This specification covers refined tin in pig form recovered and cast from primary and secondary tin-bearing materials. One grade of tin metal is specified and is designated by the grade letter shown in Table 1.
1.2 The percent values of tin contained are to be regarded as the standard.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
TABLE 1 Chemical Composition and Impurity Contents
| Element | Composition, - wt% | |||
|---|---|---|---|---|
| Grade "A" | Grade "B" | Grade "A" for the Manufacture of Tinplate | Ultra Pure Grade |
|
| Tin, min | 99.85 | 99.85 | 99.85 | 99.95 |
| Antimony, max | 0.04 | 0.015 | 0.04 | 0.005 |
| Arsenic, max | 0.05 | 0.05 | 0.05 | 0.005 |
| Bismuth, max | 0.030 | 0.030 | 0.030 | 0.015 |
| Cadmium, max | 0.001 | 0.001 | 0.001 | 0.001 |
| Copper, max | 0.04 | 0.04 | 0.04 | 0.005 |
| Iron, max | 0.010 | 0.010 | 0.010 | 0.010 |
| Lead, max | 0.05 | 0.5 | 0.010 | 0.001 |
| Ni + Co, max | 0.01 | 0.01 | 0.01 | 0.010 |
| Sulfur, max | 0.01 | 0.01 | 0.01 | 0.010 |
| Zinc, max | 0.005 | 0.005 | 0.005 | 0.005 |
| Silver, max | 0.01 | 0.01 | 0.01 | 0.010 |
| Other impuritiesA | 0.010 | 0.010 | ||
A Maximum per impurity not listed above.
More ASTM standard pdf
ASTM B920-16
Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
$30.00 $60.00
ASTM A660/A660M-21
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
$23.00 $46.00
ASTM E2720-10
Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses
$32.00 $65.00
ASTM B496-13
Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
$26.00 $52.00