• ASTM C692-08e1

ASTM C692-08e1

Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

ASTM International, 10/01/2008

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:01/10/2008

Pages:7

File Size:1 file , 160 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers two procedures for the laboratory evaluation of thermal insulation materials to determine whether they contribute to external stress corrosion cracking (ESCC) of austenitic stainless steel due to soluble chlorides within the insulation. This laboratory procedure is not intended to cover all of the possible field conditions that contribute to ESCC.

1.2 While the 1977 edition of this test method (Dana test) is applicable only to wicking-type insulations, the procedures in this edition are intended to be applicable to all insulating materials, including cements, some of which disintegrate when tested in accordance with the 1977 edition. Wicking insulations are materials that wet through and through when partially (50 to 75 %) immersed in water for a short period of time (10 min or less).

1.3 These procedures are intended primarily as a preproduction test for qualification of the basic chemical composition of a particular manufacturer's product and are not intended to be routine tests for ongoing quality assurance or production lot compliance. Test Methods C871, on the other hand, is used for confirmation of acceptable chemical properties of subsequent lots of insulation previously found acceptable by this test method.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM C1179-91(2000)

ASTM C1179-91(2000)

Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

$25.00 $50.00

ASTM D6200-01

ASTM D6200-01

Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

$30.00 $60.00

ASTM D189-01

ASTM D189-01

Standard Test Method for Conradson Carbon Residue of Petroleum Products

$30.00 $60.00

ASTM F439-01

ASTM F439-01

Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

$29.00 $58.00