Your shopping cart is empty!
ASTM International, 03/01/2017
Publisher: ASTM
File Format: PDF
$32.00$65.00
Published:01/03/2017
Pages:15
File Size:1 file , 280 KB
Note:This product is unavailable in Russia, Ukraine, Belarus
1.1 This test method measures the sewn seam strength in woven fabrics by applying a force perpendicular to the sewn seams.
1.1.1 The axis perpendicular to the sewn seam can represent either the warp yarn axis or filling yarn axis, the same axis tested when using grab Test Method D5034.
1.1.1.1 This test method is applicable to sewn seams obtained from a previously sewn article or seams sewn with fabric samples using one of two specific seam assemblies as shown in Table 1.
Fabric Mass: ≤ 4 oz/yd² [130 g/m²]
Procedure A
Procedure B
Mass
up to 4 oz/yd² [130 g/m²]
Seam allowance
13 mm [0.5 in.]
Needle:
Size
Metric 90 [0.036 in.]
Finish
chrome
Point
thin ball (No. 1/No. 23)
Sewing thread size:
Spun Polyester
Tex 40
Polyester-Core
Seam Type
Ssa-1
Stitch Type
301
401
Stitch Density
4.7 ± 1/2 stitches per centimetre
[12 ± 1/2 stitches per inch]
Fabric Mass: > 4 oz/yd² [130 g/m²] ≤ 8 oz/yd² [270 g/m²]
4 oz/yd² [130 g/m²] up to 8 oz/yd² 270 g/m²
4 oz/yd² [130 g/m²] up to 270 g/m2 [8 oz/yd² ]
Seam Allowance
Metric 110 [0.044 in.]
ball
Sewing Thread:
Tex 60
Seam type
SSa-1
Stitch type
ASTM Book of Standards Volume 02.04: Nonferrous Metals - Nickel, Titanium, Lead, Tin, Zinc, Zirconium, Precious, Reactive, Refractory Metals and Alloys: Materials for Thermostats, Electrical Heating and Resistance Contacts, and Connectors
$125.00 $251.68
Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
$26.00 $52.00
Standard Specification for Alloy Steel Socket-Head Cap Screws
$29.00 $58.00
Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
$33.00 $67.00
