• ASTM D2247-11

ASTM D2247-11

Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

ASTM International, 02/01/2011

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:01/02/2011

Pages:7

File Size:1 file , 160 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This practice covers the basic principles and operating procedures for testing water resistance of coatings by exposing coated specimens in an atmosphere maintained at 100 % relative humidity so that condensation forms on the test specimens.

1.2 This practice uses the technique of creating a slight temperature differential within the exposure area to form condensation on the coated specimens. As the warmer saturated air passes the cooler specimens, water is deposited onto the specimens in the form of condensation.

1.3 This practice places the entire specimen in the exposure area allowing condensation to form on all surfaces. This makes this practice suitable for flat panels as well as large or 3D objects. This practice differs from other methods where condensation is only formed on the front coating surface, but the back surface is outside the exposure area. Other tests may also deposit water droplets on the surface but where the source is not from condensation.

Note 1 - Alternative practices for testing the water resistance of coatings include Practices D870, D1735, and D4585.

1.4 This practice is limited to the methods of obtaining, measuring, and controlling the conditions and procedures of tests conducted in 100 % relative humidity. It does not specify specimen preparation, or evaluation of results.

1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM D3507-97(2000)

ASTM D3507-97(2000)

Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood (Withdrawn 2008)

$29.00 $58.00

ASTM D4858-08

ASTM D4858-08

Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

$30.00 $60.00

ASTM C1375-00

ASTM C1375-00

Standard Guide for Substrates Used in Testing Building Seals and Sealants

$25.00 $50.00

ASTM D168-94(2000)

ASTM D168-94(2000)

Standard Test Method for Coke Residue of Creosote (Withdrawn 2006)

$25.00 $50.00