Your shopping cart is empty!
ASTM International, 04/01/2013
Publisher: ASTM
File Format: PDF
$32.00$64.00
Published:01/04/2013
Pages:6
File Size:1 file , 80 KB
Note:This product is unavailable in Russia, Ukraine, Belarus
1.1 In the interest of uniformity and quality, the aerosol industry has developed dimensional guidelines which are suggested for U.S. three-piece steel and tin-plate aerosol cans of straight-wall and necked-in design. Domestic can makers uniformly agreed to comply with these guidelines and were instrumental in their development. A series of standard methods and gages were also developed to uniformly determine specific dimensions. The tolerances established for these dimensions allow for can manufacturing and filling process variations.
1.2 It is the purpose of this guide to provide a listing of currently manufactured aerosol can sizes as well as industry voluntary dimensional guidelines.
1.3 Table 1 and Table 2 present the sales code diameter and height of straight-wall and necked-in three-piece aerosol cans. The units in parentheses are in SI format, an alternate reference using dimensions suggested by the Metric Working Group of the Can Makers Institute. They are based on International Organization for Standardization (ISO) inside diameters to the nearest whole millimetre. Can heights are based on heights over the double seam (CSMA Dimension D) converted to the nearest whole millimetre.
202 (52 mm) by
207.5 (60 mm) by
211 (65 mm) by
300 (73 mm) by
214 ( 73)
509 (141)
413 (122)
709 (192)
306 ( 85)
605 (160)
600 (152)
314 ( 98)
701 (179)
604 (158)
406 (111)
703 (182)
612 (171)
505 (134)
708 (190)
713 (198)
908 (241)
700 (177)
111/112 by (45 mm)
200/202 by (52 mm)
202/205 by (57 mm)
207.5/211 by (65 mm)
211/214 by (70 mm)
410 (117)
315 (100)
312 ( 95)
608 (165)
714 (200)
508 (139)
804 (209)
514 (149)
704 (184)
1006 (263)
Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 oC by Ultra Fast Gas Chromatography (UF GC)
$29.00 $58.00
Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
$26.00 $52.00
Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
$30.00 $60.00
Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
$24.00 $48.00
