• Your shopping cart is empty!

  • ASTM D3754-14

ASTM D3754-14

Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

ASTM International, 03/01/2014

Publisher: ASTM

File Format: PDF

$33.00$67.00


Published:01/03/2014

Pages:14

File Size:1 file , 200 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), for use in pressure systems for conveying sanitary sewage, storm water, and many industrial wastes, and corrosive fluids. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP) are fiberglass pipes. This standard is suited primarily for pipes to be installed in buried applications, although it may be used to the extent applicable for other installations such as, but not limited to, jacking, tunnel lining and slip-lining and rehabilitation of existing pipelines. Pipe covered by this specification is intended to operate at internal gage pressures of 450 psi (3103 kPa) or less.

Note 1-For the purposes of this standard, polymer does not include natural polymers.

1.2 The values given in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

TABLE 1 General Designation Requirements for Fiberglass Pressure Pipe

Desig-
nation

Property

Cell LimitsA

1

Type

1
glass-fiber-reinforced thermosetting polyesterB resin mortar (RPMP polyester)B

2
glass-fiber-reinforced thermosetting polyesterB resin (RTRP polyester)B

3
glass-fiber-reinforced thermosetting epoxy resin mortar (RPMP epoxy)

4
glass-fiber-reinforced thermosetting epoxy resin (RTRP epoxy)

2

Liner

1
reinforced thermoset liner

2
non-reinforced thermoset liner

3
thermoplastic liner

4
no liner

3

Grade  

1
Polyester resin surface layer-
reinforcedB

2
polyesterB resin surface layer-
nonreinforcedB

3
polyesterB resin and sand surface layer nonreinforced

4
epoxy resin surface layer-
reinforced

5
epoxy resin surface layer-
nonreinforced

6
No surface layer

4

  ClassC

C50

C100

C150

C200

C250

C300

C350

C400

C450

5

Pipe Stiffness
 psi (kPa)
ASTM D7083-04(2010)e1

ASTM D7083-04(2010)e1

Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

$26.00 $52.00

ASTM F2853-10e1

ASTM F2853-10e1

Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

$29.00 $58.00

ASTM C1688/C1688M-10a

ASTM C1688/C1688M-10a

Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

$26.00 $52.00

ASTM D1756-96(2000)

ASTM D1756-96(2000)

Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal

$26.00 $52.00