• ASTM D4191-15

ASTM D4191-15

Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry

ASTM International, 02/01/2015

Publisher: ASTM

File Format: PDF

$22.00$44.00


Published:01/02/2015

Pages:4

File Size:1 file , 80 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers the determination of low amounts of sodium in waters2 having low solids content. The applicable range of this test method is from 0.20 to 3.0 mg/L when using the 589.6-nm resonance line. This range may be extended upward by dilution of an appropriate aliquot of sample or by use of the less-sensitive 330.2-nm resonance line (see Test Method D3561). Many workers have found that this test method is reliable for sodium levels to 0.005 mg/L, but use of this test method at this low level is dependent on the configuration of the aspirator and nebulizer system available in the atomic absorption spectrophotometer as well as the experience and skill of the analyst. The precision and bias data presented are insufficient to justify use of this test method in the 0.005 to 0.20-mg/L range.

1.2 This test method has been used successfully with spiked reagent water. It is the analyst's responsibility to assure the validity of the test method to other low dissolved solids matrices.

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM F109-12

ASTM F109-12

Standard Terminology Relating to Surface Imperfections on Ceramics

$29.00 $58.00

ASTM D2148-18

ASTM D2148-18

Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

$31.00 $62.00

ASTM F1140/F1140M-13

ASTM F1140/F1140M-13

Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

$30.00 $60.00

ASTM F1962-11

ASTM F1962-11

Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings (Withdrawn 2020)

$34.00 $69.00