• ASTM D6581-12

ASTM D6581-12

Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography

ASTM International, 03/01/2012

Publisher: ASTM

File Format: PDF

$43.00$86.00


Published:01/03/2012

Pages:22

File Size:1 file , 620 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This multi-test method covers the determination of the oxyhalides-chlorite, bromate, and chlorate, and bromide, in raw water, finished drinking water and bottled (non-carbonated) water by chemically and electrolytically suppressed ion chromatography. The ranges tested using this method for each analyte were as follows:

Range Sections
Test Method A:
Chemically Suppressed Ion Chromatography
8 to 19
Chlorite 5 to 500 µg/L
Bromate 1 to 25 µg/L
Bromide 5 to 250 µg/L
Chlorate 5 to 500 µg/L
Test Method B:
Electrolytically Suppressed Ion Chromatography
20 to 30
Chlorite 20 to 1000 µg/L
Bromate 1 to 30 µg/L
Bromide 20 to 200 µg/L
Chlorate 20 to 1000 µg/L

1.1.1 The upper limits may be extended by appropriate sample dilution or by the use of a smaller injection volume. Other ions of interest, such as fluoride, chloride, nitrite, nitrate, phosphate, and sulfate may also be determined using this method. However, analysis of these ions is not the object of this test method.

1.2 It is the user's responsibility to ensure the validity of these test methods for waters of untested matrices.

1.3 This test method is technically equivalent with Part B of U.S. EPA Method 300.1 , titled "The Determination of Inorganic Anions in Drinking Water by Ion Chromatography".

1.4 The values stated in either SI or inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM A795/A795M-07

ASTM A795/A795M-07

Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

$30.00 $60.00

ASTM C1063-12a

ASTM C1063-12a

Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

$30.00 $60.00

ASTM F2508-12a

ASTM F2508-12a

Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces

$29.00 $58.00

ASTM E1300-12

ASTM E1300-12

Standard Practice for Determining Load Resistance of Glass in Buildings

$45.00 $91.00