• ASTM D7042-11

ASTM D7042-11

Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

ASTM International, 02/15/2011

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:15/02/2011

Pages:7

File Size:1 file , 140 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers and specifies a procedure for the concurrent measurement of both the dynamic viscosity, η, and the density, ρ, of liquid petroleum products and crude oils, both transparent and opaque. The kinematic viscosity, ν, can be obtained by dividing the dynamic viscosity, η, by the density, ρ, obtained at the same test temperature.

1.2 The result obtained from this test method is dependent upon the behavior of the sample and is intended for application to liquids for which primarily the shear stress and shear rate are proportional (Newtonian flow behavior).

1.3 While the precision has only been determined for base oils in the viscosity range from 2.05 to 456 mPa·s at 40°C and from 0.83 to 31.6 mPa·s at 100°C and in the density range from 0.82 to 0.92 g/cm³ at 15°C (see 15.5), the test method can be applied to a wider range of materials, viscosity, density, and temperature. For materials not listed in Precision and Bias (Section 15), the precision and bias may not be applicable.

1.4 The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM D5898/D5898M-96(2013)

ASTM D5898/D5898M-96(2013)

Standard Guide for Standard Details for Adhered Sheet Waterproofing

$36.00 $72.00

ASTM C1216/C1216M-13

ASTM C1216/C1216M-13

Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants (Withdrawn 2022)

$34.00 $68.00

ASTM D4737-96a

ASTM D4737-96a

Standard Test Method for Calculated Cetane Index by Four Variable Equation

$25.00 $50.00

ASTM A1094/A1094M-16

ASTM A1094/A1094M-16

Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

$29.00 $58.00