• ASTM D7544-12

ASTM D7544-12

Standard Specification for Pyrolysis Liquid Biofuel

ASTM International, 06/01/2012

Publisher: ASTM

File Format: PDF

$30.00$60.00


Published:01/06/2012

Pages:5

File Size:1 file , 95 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This specification covers grades of pyrolysis liquid biofuel produced from biomass intended for use in various types of fuel-burning equipment under various climatic and operating conditions. These grades are described as follows:

1.1.1 Grade G is intended for use in industrial burners equipped to handle the pyrolysis liquid biofuels meeting the requirements listed for Grade G in Table 1. The pyrolysis liquid biofuel listed under Grade G in Table 1 is not intended for use in residential heaters, small commercial boilers, engines, or marine applications.

1.1.2 Grade D is intended for use in commercial/industrial burners requiring lower solids and ash content and which are equipped to handle the pyrolysis liquid biofuels meeting the requirements listed for Grade D in Table 1. The pyrolysis liquid biofuel listed under Grade D in Table 1 is not intended for use in residential heaters, engines, or marine applications not modified to handle these types of fuels.

Note 1 - For information on the significance of the physical, chemical, and performance properties identified in this specification, see Appendix X1.

1.2 This specification is for use in contracts for the purchase of pyrolysis liquid biofuel and for guidance of consumers of this type of fuel.

1.3 Nothing in this specification should preclude observance of national or local regulations, which may be more restrictive.

Note 2 - The generation and dissipation of static electricity may create problems in the handling of pyrolysis liquid biofuel. For more information on the subject, see Guide D4865.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4.1 Exception - BTU units are included for information only in 3.1.5.1.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

TABLE 1 Detailed Requirements for Pyrolysis Liquid Biofuels

Property Test Method Grade G Grade D
Gross Heat of Combustion, MJ/kg, min D240 15 15
Water Content, % mass, max E203 30 30
Pyrolysis Solids Content, % mass, max D7579 2.5 0.25
Kinematic Viscosity at 40°C, mm²/s, max D445A 125 125
Density at 20°C, kg/dm³ D4052 1.1-1.3 1.1-1.3
Sulfur Content, % mass, max D4294 0.05 0.05
Ash Content, % mass, max D482 0.25 0.15
pH. E70 Report Report
Flash Point,°C, min D93, Procedure B 45 45
Pour Point,°C, max D97 -9 -9

A Without filtering.

More ASTM standard pdf

ASTM E2125-11

ASTM E2125-11

Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues

$26.00 $52.00

ASTM F2440-11

ASTM F2440-11

Standard Specification for Indoor Wall/Feature Padding

$25.00 $50.00

ASTM F2315-11

ASTM F2315-11

Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

$29.00 $58.00

ASTM E2781-11

ASTM E2781-11

Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis

$29.00 $58.00