• ASTM D7551-10(2015)

ASTM D7551-10(2015)

Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

ASTM International, 11/01/2015

Publisher: ASTM

File Format: PDF

$28.00$57.00


Published:01/11/2015

Pages:9

File Size:1 file , 350 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers the determination of total volatile sulfur in gaseous hydrocarbons, Liquefied Petroleum Gases (LPG) and Liquefied Natural Gas (LNG). It is applicable to analysis of natural gaseous fuels, process intermediates, final product hydrocarbons and generic gaseous fuels containing sulfur in the range of 1 to 200 mg/kg. Samples can also be tested at other total sulfur levels using either pre-concentration methods or sample dilution using a diluent gas. The methodology for preconcentration and dilution techniques is not covered in this test method. The precision statement does not apply if these techniques are used in conjunction with this test method. The diluent gas, such as UHP nitrogen, zero nitrogen or zero air, shall not have a significant total sulfur concentration.

1.2 This test method may not detect sulfur compounds that do not volatilize under the conditions of the test.

1.3 This test method covers the laboratory determination and the at-line/on-line determination of total volatile sulfur in gaseous fuels, LPG, and LNG.

1.4 This test method is applicable for total volatile sulfur determination in gaseous hydrocarbons, LPG, and LNG containing less than 0.35 mole % halogen(s).

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Sections 4.1, 7.3, 7.4, 11.2, and Section 8.

More ASTM standard pdf

ASTM E1214-11e1

ASTM E1214-11e1

Standard Guide for Use of Melt Wire Temperature Monitors for Reactor Vessel Surveillance

$25.00 $50.00

ASTM G166-00(2011)

ASTM G166-00(2011)

Standard Guide for Statistical Analysis of Service Life Data

$30.00 $60.00

ASTM B946-06

ASTM B946-06

Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products

$25.00 $50.00

ASTM C652-12

ASTM C652-12

Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

$30.00 $60.00