ASTM D8114-22a

Subject Section Introduction   Scope 1 Referenced Documents 2 Terminology 3 Summary of Test Method 4 Significance and Use 5 Apparatus 6 General 6.1 Test Engine Configuration 6.2 Laboratory Ambient Conditions 6.3 Engine Speed and Torque Control 6.4 Dynamometer 6.4.1 Dynamometer Torque 6.4.2 Engine Cooling System 6.5 External Oil System 6.6 Fuel System 6.7 Fuel Flow Measurement 6.7.2 Fuel Temperature and Pressure Control to the Fuel Flow Meter 6.7.3 Fuel Temperature and Pressure Control to Engine Fuel Rail 6.7.4 Fuel Supply Pumps 6.7.5 Fuel Filtering 6.7.6 Engine Intake Air Supply 6.8 Intake Air Humidity 6.8.1 Intake Air Filtration 6.8.2 Intake Air Pressure Relief 6.8.3 Temperature Measurement 6.9 Thermocouple Location 6.9.5 AFR Determination 6.10 Exhaust and Exhaust Back Pressure Systems 6.11 Exhaust Manifolds 6.11.1 Laboratory Exhaust System 6.11.2 Exhaust Back Pressure 6.11.3 Pressure Measurement and Pressure Sensor Locations 6.12 Engine Oil 6.12.2 Fuel to Fuel Flow Meter 6.12.3 Fuel to Engine Fuel Rail 6.12.4 Exhaust Back Pressure 6.12.5 Intake Air 6.12.6 Intake Manifold Vacuum/Absolute Pressure 6.12.7 Coolant Flow Differential Pressure 6.12.8 Crankcase Pressure 6.12.9 Engine Hardware and Related Apparatus 6.13 Test Engine Configuration 6.13.1 ECU (Power Control Module) 6.13.2 Thermostat Block-Off Adapter Plate 6.13.3 Wiring Harness 6.13.4 Thermostat Block-Off Plate 6.13.5 Oil Filter Adapter Plate 6.13.6 Modified Throttle Body Assembly 6.13.7 Fuel Rail 6.13.8 Miscellaneous Apparatus Related to Engine Operation 6.14 Reagents and Materials 7 Engine Oil 7.1 Test Fuel 7.2 Engine Coolant 7.3 Cleaning Materials 7.4 Preparation of Apparatus 8 Test Stand Preparation 8.2 Engine Preparation 9 Cleaning of Engine Parts 9.2 Engine Assembly Procedure 9.3 General Assembly Instructions 9.3.1 Bolt Torque Specifications 9.3.2 Sealing Compounds 9.3.3 Harmonic Balancer 9.3.5 Thermostat 9.3.6 Coolant Inlet 9.3.7 Oil Filter Adapter 9.3.8 Dipstick Tube 9.3.9 Sensors, Switches, Valves, and Positioners 9.3.10 Ignition System 9.3.11 Fuel Injection System 9.3.12 Intake Air System 9.3.13 Engine Management System 9.3.14 Accessory Drive Units 9.3.15 Exhaust Manifolds 9.3.16 Engine Flywheel and Guards 9.3.17 Lifting of Assembled Engines 9.3.18 Engine Mounts 9.3.19 Non-Phased Camshaft Gears 9.3.20 Internal Coolant Orifice 9.3.21 Calibration 10 Stand/Engine Calibration 10.1 Procedure 10.1.1 Reporting of Reference Results 10.1.2 Analysis of Reference/Calibration Oils 10.1.3 Instrument Calibration 10.2 Engine Torque Measurement System 10.2.3 Fuel Flow Measurement System 10.2.4 Coolant Flow Measurement System 10.2.5 Thermocouple and Temperature Measurement System 10.2.6 Humidity Measurement System 10.2.7 Other Instrumentation 10.2.8 Test Procedure 11 External Oil System 11.1 Flush Effectiveness Demonstration 11.2 Preparation for Oil Charge 11.3 Initial Engine Start-Up 11.4