• ASTM E1549-95(2000)e1

ASTM E1549-95(2000)e1

Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

ASTM International, 07/25/2000

Publisher: ASTM

File Format: PDF

$32.00$65.00


Published:25/07/2000

Pages:11

File Size:1 file , 170 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers.

1.2 The function of cleanroom garments is to contain the contaminants generated by people and to minimize contaminants from the garments.

1.3 Two types of fabrics can be selected for the garments. Both types are inherently static-dissipative materials to prevent electrical discharges that can damage sensitive hardware or initiate explosions in the presence of flammable vapors. The material specified for "hazardous environments" is flame resistant and provides additional protection to the wearer. Selection of garment design and fabric should be based on the user's needs with respect to functional and environmental requirements.

1.4 Additional, background information can be found in SD-TR-91-26 and IES-RP-CC003.2.

1.5 This standard is intended to be in compliance with the ASTM policy on Fire Standards Flammability tests specified in this standard should be used to measure and describe the properties of fabrics in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fabrics under actual fire conditions. However, results of the tests may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of operations in controlled environment areas.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information purposes only but are hard conversions.

More ASTM standard pdf

ASTM E2787-11

ASTM E2787-11

Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

$29.00 $58.00

ASTM F2226-03

ASTM F2226-03

Standard Practice for Determining the Adhesion of Prints and Laminating Films

$29.00 $58.00

ASTM A941-10a

ASTM A941-10a

Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

$29.00 $58.00

ASTM C1029-10

ASTM C1029-10

Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

$26.00 $52.00