Your shopping cart is empty!
ASTM International, 04/01/2013
Publisher: ASTM
File Format: PDF
$43.00$86.00
Published:01/04/2013
Pages:24
File Size:1 file , 250 KB
Note:This product is unavailable in Russia, Ukraine, Belarus
1.1 These test methods cover the determination of total carbon and sulfur and acid-base characteristics in metal bearing ores and related materials such as leach residues, tailings, and waste rock within the following ranges:
Analyte
Application Range, %
Quantitative Range, %
Total Carbon
0 to 10
0.08 to 10
Total Sulfur
0 to 8.8
0.023 to 8.8
0.01 % to 5.87 %
0.0002 % to 4.70 %
Residual Carbon from Pyrolysis
0.002 % to 4.97 %
Residual Sulfur from Pyrolysis
0.014 % to 1.54 %
Pyrolysis Loss Sulfur
0 % to 4.42 %
Hydrochloric Acid Insoluble Carbon
0.025 % to 0.47 %
Hydrochloric Acid Loss Carbon
0 % to 5.78 %
Hydrochloric Acid Insoluble Sulfur
0.012 % to 4.20 %
Acid Neutralization Potential Acidity Titration
-1.0 % to 100 %
Acid Neutralization Potential Acidity Titration Low Range
-1.0 % to 2 % CaCO3
Nitric Acid Insoluble Sulfur
0.006 % to 0.924 %
Nitric Acid Loss Sulfur
-0.08 % to 4.19 %
Sodium Carbonate Insoluble Sulfur
0.007 % to 3.78 %
1.2 The quantitative ranges for the partial decomposition test methods are dependent on the mineralogy of the samples being tested. The user of these test methods is advised to conduct an interlaboratory study in accordance with Practice E1601 on the test methods selected for use at a particular mining site, in order to establish the quantitative ranges for these test methods on a site-specific basis.
1.3 The test methods appear in the following order:
Sections
Carbon and Sulfur, Total
10.1-10.9
Carbon and Sulfur, Residual from Pyrolysis
10.10-10.18
Carbon and Sulfur, Hydrochloric Acid Insoluble
10.19-10.27
10.28-10.36
10.37-10.46
Sulfur, Nitric Acid Insoluble
10.47-
Standard Test Method for Performance Validation of Thermomechanical Analyzers
$28.00 $57.00
Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
$41.00 $82.00
Standard Practice for Structural Finite Element Model Verification and Validation
$25.00 $50.00
Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
$31.00 $63.00
