ASTM E2797-15

1.1 Purpose-The purpose of this standard is to define a commercially useful practice in the United States of America for conducting a building energy performance assessment (BEPA) on a building involved in a commercial real estate transaction and subsequent reporting of the building energy performance information. The practice is intended to provide a methodology to the user for the collection, compilation, analysis, and reporting of building energy performance information associated with a commercial building. The practice may be used independently or as a voluntary supplement to Guide E2018 for property condition assessments or Practice E1527 for Phase I environmental site assessments. Utilization of this practice and performance of a BEPA is voluntary. If the property owner (e.g., the seller) is unwilling or unable to provide building energy use and cost information, a BEPA cannot be performed.

1.2 Building Energy Performance-This practice defines building energy performance as the building's total annual energy use and cost for heating, cooling, electricity, and other related uses. Energy use, for example, includes total electricity purchased; purchased or delivered steam, hot water, or chilled water; natural gas; fuel oil; coal; propane; biomass; or any other matter consumed as fuel and any electricity generated on site from renewable/alternative energy systems (for example, wind energy generator technology, fuel cells, microturbines or solar photovoltaic systems).

1.3 Objectives-Objectives in the development of this practice are to: (1) define a commercially useful practice for collecting, compiling, and analyzing building energy performance information associated with a building involved in a commercial real estate transaction; (2) facilitate consistency in the collection, compilation, analysis, and reporting of building energy performance information as may be required under building benchmarking, labeling, disclosure, or mandatory auditing regulations; (3) supplement as needed a property condition assessment conducted in accordance with Guide E2018 or an environmental site assessment conducted in accordance with Practice E1527; (4) provide that the process for building energy performance data collection, compilation, analysis, and reporting is consistent, transparent, practical and reasonable; and (5) provide an industry standard for the conduct of a BEPA on a building involved in a commercial real estate transaction, subject to existing statutes and regulations which may differ in terms of scope and practice.

1.4 Documentation-The scope of this practice includes data collection, compilation and reporting requirements. Documentation of all sources, records, and resources relied upon in the investigation is provided in the report.

1.5 Considerations Outside the Scope-The use of this practice is limited to the collection, compilation, and analysis of building energy performance information as defined by this practice. While this information may be used to facilitate building benchmarking, labeling, rating or ranking, reporting of building energy performance information between a seller and a buyer or a landlord and a tenant on a voluntary basis or as may be required by building benchmarking, labeling, disclosure or mandatory auditing regulations applicable to the building, or any other use, such use is beyond the scope of this practice.

1.6 Organization of This Practice-This practice has 13 sections and 11 appendices. The appendices are included for informational purposes only and are not part of the procedures prescribed in this practice.

Section 1	Describes the scope of the practice.
Section 2	Identifies referenced documents.
Section 3	ASTM B892-98e3 Standard Specification for Zinc - Copper - Aluminum in Ingot Form for Die Castings $21.00 $43.20 Add to Cart ASTM D5933-96 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions $29.00 $58.00 Add to Cart ASTM F1696-96 Standard Test Method for Energy Performance of Single-Rack Hot Water Sanitizing, Door Type Commerical Dishwashing Machines $32.00 $65.00 Add to Cart ASTM A270-98ae03 Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing $29.00 $58.00 Add to Cart