• ASTM E291-04

ASTM E291-04

Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

ASTM International, 10/01/2004

Publisher: ASTM

File Format: PDF

$33.00$67.00


Published:01/10/2004

Pages:14

File Size:1 file , 150 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 These test methods cover only the analyses usually required on the following commercial products:

1.1.1 Caustic soda (sodium hydroxide), 50 and 73 % liquors; anhydrous (solid, flake, ground, or powdered), and

1.1.2 Caustic potash (potassium hydroxide), 45 % liquor; anhydrous (solid, flake, ground, or powdered).

1.2 The analytical procedures appear in the following order:

Alkalinity (Total), Titrimetric (for 50 to 100 %NaOH and 45 to 100 % KOH) 8 to 14
Carbonate, Gas-Volumetric (0.001 g CO 2 , min) 15 to 24
Carbonate, Gravimetric (0.001 g CO 2 , min) 25 to 33
Chloride, Titrimetric, (0.001 g Cl , min) 34 to 40
Chloride, Potentiometric Titration (0.3 to 1.2 %) 41 to 47
Chloride, Ion Selective Electrode (0.6 to 120 ppm) 48 to 55
Iron, Photometric (0.005 mg Fe, min) 56 to 64
Sulfate, Gravimetric, (0.002 g SO 3 , min) 65 to 71
Keywords 72

1.3 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are provided for information only.

1.4 Review the current Material Safety Data Sheet (MSDS) for detailed information concerning toxicity, first-aid procedures, handling, and safety precautions.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 6.

More ASTM standard pdf

ASTM E2163-01

ASTM E2163-01

Standard Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs

$25.00 $50.00

ASTM E3013/E3013M-15

ASTM E3013/E3013M-15

Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction

$29.00 $58.00

ASTM B984-12

ASTM B984-12

Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use

$30.00 $60.00

ASTM D4440-01

ASTM D4440-01

Standard Test Method for Plastics: Dynamic Mechanical Properties: Melt Rheology

$26.00 $52.00