KR Curve Determination,ASTM International, 05/01/2023" />
  • ASTM E561-23

ASTM E561-23

Standard Test Method for KR Curve Determination

ASTM International, 05/01/2023

Publisher: ASTM

File Format: PDF

$31.00$63.00


Published:01/05/2023

Pages:18

File Size:1 file , 800 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers the determination of the resistance to fracture of metallic materials under Mode I loading at static rates using either of the following notched and precracked specimens: the middle-cracked tension M(T) specimen or the compact tension C(T) specimen. A KR curve is a continuous record of toughness development (resistance to crack extension) in terms of KR plotted against crack extension in the specimen as a crack is driven under an increasing stress intensity factor, K. (1)2
1.2 Materials that can be tested for KR curve development are not limited by strength, thickness, or toughness, so long as specimens are of sufficient size to remain predominantly elastic to the effective crack extension value of interest.
1.3 Specimens of standard proportions are required, but size is variable, to be adjusted for yield strength and toughness of the materials.
1.4 Only two of the many possible specimen types that could be used to develop KR curves are covered in this method.
1.5 The test is applicable to conditions where a material exhibits slow, stable crack extension under increasing crack driving force, which may exist in relatively tough materials under plane stress crack tip conditions.
1.6 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

More ASTM standard pdf

ASTM D6757-07

ASTM D6757-07

Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

$26.00 $52.00

ASTM D4553-08

ASTM D4553-08

Standard Test Method for Determining In Situ Creep Characteristics of Rock (Withdrawn 2017)

$30.00 $60.00

ASTM D4435-08

ASTM D4435-08

Standard Test Method for Rock Bolt Anchor Pull Test

$30.00 $60.00

ASTM D5807-08

ASTM D5807-08

Standard Practice for Evaluating the Overpressurization Characteristics of Inflatable Restraint Cushions

$26.00 $52.00