• ASTM F2129-15

ASTM F2129-15

Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

ASTM International, 03/01/2015

Publisher: ASTM

File Format: PDF

$29.00$58.00


Published:01/03/2015

Pages:9

File Size:1 file , 170 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method assesses the corrosion susceptibility of small, metallic, implant medical devices, or components thereof, using cyclic (forward and reverse) potentiodynamic polarization. Examples of device types that may be evaluated by this test method include, but are not limited to, vascular stents, ureteral stents (Specification F1828), filters, support segments of endovascular grafts, cardiac occluders, aneurysm or ligation clips, staples, and so forth.

1.2 This test method is used to assess a device in its final form and finish, as it would be implanted. These small devices should be tested in their entirety. The upper limit on device size is dictated by the electrical current delivery capability of the test apparatus (see Section 6). It is assumed that test methods, such as Reference Test Method G5 and Test Method G61 have been used for material screening.

1.3 Because of the variety of configurations and sizes of implants, this test method provides a variety of specimen holder configurations.

1.4 This test method is intended for use on implantable devices made from metals with a relatively high resistance to corrosion.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM C1314-12

ASTM C1314-12

Standard Test Method for Compressive Strength of Masonry Prisms

$30.00 $60.00

ASTM A351/A351M-13a

ASTM A351/A351M-13a

Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

$30.00 $60.00

ASTM D5007-99(2013)

ASTM D5007-99(2013)

Standard Test Method for Wet-to-Dry Hiding Change

$30.00 $60.00

ASTM D7842/D7842M-12

ASTM D7842/D7842M-12

Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons

$29.00 $58.00