• ASTM F2236-03

ASTM F2236-03

Standard Consumer Safety Specification for Soft Infant Carriers

ASTM International, 03/10/2003

Publisher: ASTM

File Format: PDF

$29.00$58.00


Published:10/03/2003

Pages:6

File Size:1 file , 320 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This consumer safety specification establishes performance requirements, test methods and marking requirements to promote safe use of soft infant carriers.

1.2 This consumer safety specification is intended to minimize the risk of incidents to an infant from the normal use and reasonably foreseeable misuse of these products.

1.3 For purposes of definition, a soft infant carrier is a product, normally of sewn fabric construction, which is designed to contain a full term infant, generally in an upright position, in close proximity to the caregiver. In general, the child will weigh between 7 and 25 lb (3.2 and 11.3 kg). The soft infant carrier is normally "worn" by the caregiver with the carrier, and thus the infant, suspended from one or both shoulders of the caregiver. These products are generally worn on the front of the caregiver's body with the infant either facing towards or away from the caregiver. This consumer safety specification does not include products generally referred to as "slings."

1.4 No soft infant carrier produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with the specification unless it complies with all of the requirements contained herein.

1.5 This consumer safety specification is not intended to address incidents and injuries resulting from the interaction of other persons or objects with the caregiver and infant while the soft carrier is in use.

1.6 The test values stated in inch-pound units in this consumer safety specification are to be regarded as the standard. The metric values in parentheses are for reference only.

1.7 The following precautionary caveat pertains only to the test method portion, Section of this consumer safety specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

More ASTM standard pdf

ASTM A192/A192M-91(1996)e1

ASTM A192/A192M-91(1996)e1

Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

$27.00 $54.00

ASTM D1002-05

ASTM D1002-05

Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

$30.00 $60.00

ASTM F710-98

ASTM F710-98

Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring

$29.00 $58.00

ASTM A609/A609M-91(2002)

ASTM A609/A609M-91(2002)

Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

$30.00 $60.00