• ASTM F2634-15

ASTM F2634-15

Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

ASTM International, 11/01/2015

Publisher: ASTM

File Format: PDF

$36.00$72.00


Published:01/11/2015

Pages:13

File Size:1 file , 500 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This is a tensile impact test method that develops enough tensile impact energy at specific rates of strain to rupture standard tensile impact specimens of butt fused plastic pipe. It is used to determine the quality of PE butt fusion joints made in the field or in qualification testing. It can also be used to determine the optimum butt fusion joining parameters of PE materials.

1.2 This test method is applicable for testing pipe specimens with a diameter 2.37 in. (60.3 mm) and larger with a wall thickness from 0.25 in. (6.3 mm) and larger.

Note 1: This test method is similar to ISO 13953.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This test method may be used alone or together with other test methods, to evaluate the quality of the butt fused joints. When this test, conducted at laboratory temperatures per 9.2, is combined with the elevated temperature, sustained pressure test in Specification D3035, both the short term and long term strength of the PE butt fusion joint will be verified.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM D4506-13e1

ASTM D4506-13e1

Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

$32.00 $64.00

ASTM A132-04(2009)

ASTM A132-04(2009)

Standard Specification for Ferromolybdenum

$26.00 $52.00

ASTM D5904-02(2009)

ASTM D5904-02(2009)

Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

$30.00 $60.00

ASTM C390-08(2013)

ASTM C390-08(2013)

Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

$26.00 $52.00