• ASTM F2861-14

ASTM F2861-14

Standard Test Method for Enhanced Performance of Combination Oven in Various Modes

ASTM International, 01/01/2014

Publisher: ASTM

File Format: PDF

$32.00$65.00


Published:01/01/2014

Pages:19

File Size:1 file , 330 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 This test method covers the evaluation of the energy and water consumption and the cooking performance of combination ovens that can be operated in hot air convection, steam, and the combination of both hot air convection and steam modes. The test method is also applicable to convection ovens with moisture injection. The results of this test method can be used to evaluate a combination oven and understand its energy consumption.

1.2 This test method is applicable to gas and electric combination ovens that can be operated in convection, steam and combination modes.

1.3 The combination oven can be evaluated with respect to the following (where applicable):

1.3.1 Energy input rate and thermostat calibration (10.2).

1.3.2 Preheat energy consumption and time (10.3).

1.3.3 Idle energy rate in convection, steam and combination modes (10.4).

1.3.4 Pilot energy rate (if applicable) (10.5).

1.3.5 Cooking-energy efficiency, cooking energy rate, production capacity, water consumption and condensate temperature in steam mode (10.6).

1.3.6 Cooking-energy efficiency, cooking energy rate, and production capacity in convection mode (10.7).

1.3.7 Cooking uniformity in combination mode (10.8).

1.4 The values stated in inch-pound units are to be regarded as standard. The SI units given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

More ASTM standard pdf

ASTM D6252/D6252M-98(2019)

ASTM D6252/D6252M-98(2019)

Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90 degree Angle

$21.00 $42.00

ASTM C109/C109M-20

ASTM C109/C109M-20

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

$33.00 $67.00

ASTM D6019-20

ASTM D6019-20

Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)

$22.00 $44.00

ASTM D5855/D5855M-20

ASTM D5855/D5855M-20

Standard Practice for (Analytical Procedure) Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

$26.00 $52.00