• ASTM F37-06

ASTM F37-06

Standard Test Methods for Sealability of Gasket Materials

ASTM International, 11/15/2006

Publisher: ASTM

File Format: PDF

$29.00$58.00


Published:15/11/2006

Pages:8

File Size:1 file , 130 KB

Note:This product is unavailable in Russia, Ukraine, Belarus

1.1 These test methods provide a means of evaluating the sealing properties of sheet and solid form-in-place gasket materials at room temperature. Test Method A is restricted to liquid leakage measurements, whereas Test Method B may be used for both liquid and gas leakage measurements.

1.2 These test methods are suitable for evaluating the sealing characteristics of a gasket material under different compressive flange loads. The test method may be used as an acceptance test when the producer and user have agreed to specific test conditions for the following parameters: test medium, internal pressure on medium, and flange load on gasket specimens.

1.3 These test methods use a small-diameter narrow-width gasket as the test specimen under relatively low gasket loads and relatively low pressures. Test Method F 2378 is another sealability test method that uses a larger gasket specimen and higher internal pressures and flange loads.

1.4 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For specific hazard or warning statements, or both, see 5.2.11, Section 6, 6.3, 8.2.4, 11.3.2, and 11.4.2.)

More ASTM standard pdf

ASTM D6277-01

ASTM D6277-01

Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

$30.00 $60.00

ASTM C127-01

ASTM C127-01

Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

$30.00 $60.00

ASTM D7797-12

ASTM D7797-12

Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy - Rapid Screening Method

$29.00 $58.00

ASTM D3302/D3302M-12

ASTM D3302/D3302M-12

Standard Test Method for Total Moisture in Coal

$30.00 $60.00