Your shopping cart is empty!
ASTM International, 03/01/2018
Publisher: ASTM
File Format: PDF
$32.00$65.00
Published:01/03/2018
Pages:13
File Size:1 file , 210 KB
Note:This product is unavailable in Russia, Ukraine, Belarus
1.1 This guide is intended for use in the selection, design, and installation of thermoplastic water-pressure piping systems. For specific projects, a thorough review of this guide is recommended for the purpose of selecting specific materials, methods of joining, system design factor, and any special procedures deemed necessary to assure a satisfactory system.
Note 1: Comprehensive information on the selection, design, joining, system design factors, installation and special products and piping systems for pressurized water and other specialized applications is available in the PPI Handbook of Polyethylene Pipe and from other domestic and International sources such as PE compound and product manufacturers and trade associations.
1.2 It is recommended that governing codes and project specifications be consulted prior to the use of this guide. Nothing in this guide should be construed as recommending practices or systems at variance with governing codes and project specifications.
1.3 The pipe, fittings, and joining materials shall meet the requirements of one or more of the following component product standards listed in 1.3.1 through 1.3.4 to the extent applicable. In 1.3.1, 1.3.2, and 1.3.4 the pipe standards followed by (a) are outside diameter-controlled pipes.
1.3.1 For poly(vinyl chloride) (PVC) plastic piping components:
Title of Specification
ASTM Designation
Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80 and 120 (a)
D1785
Poly(Vinyl Chloride) (PVC) Plastic Pipe (SDR-PR) (a)
D2241
Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2464
Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2466
Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2467
Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
D2564
Bell-End Poly(Vinyl Chloride) (PVC) Pipe (a)
D2672
Poly(Vinyl Chloride) (PVC) Plastic Tubing (a)
D2740
Socket-Type Poly(Vinyl Chloride) (PVC) Plastic Line Couplings
D3036
Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3139
Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F477
PVC and ABS Injected Solvent Cemented Plastic Pipe Joints
F545
1.3.2 For Chlorinated Poly(Vinyl chloride) (CPVC) plastic piping components:
Chlorinated Poly(Vinyl chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 (a)
F441/F441M
Chlorinated Pol
Standard Test Method for Deposition on Glassware During Mechanical Dishwashing
$26.00 $52.00
Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
$33.00 $67.00
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - ;10 Nickel - ;3 Manganese - ;2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675)
$25.00 $50.00
Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
