AWS B2.1-1-315:2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications

American Welding Society, 08/03/2018

Publisher: AWS

File Format: PDF

$149.00$299.00

Description

Published:03/08/2018

Pages:31

Note:This product is unavailable in Ukraine, Russia, Belarus

The data to support AWS B2.1-1-315:2018 for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs), which were reviewed and validated under the auspices of the Welding Research Council. This SWPS-N is not valid using conditions and variables outside the ranges listed. The American Welding Society and Naval Sea Systems Command (NAVSEA) consider that this SWPS-N presents information for producing an acceptable weld using the conditions and variables listed. This procedure is intended to be used for full penetration groove welds with consumable inserts. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this SWPS-N.

AWS B2.1-1-315:2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications

More AWS standard pdf

AWS D14.6/D14.6M:2005

GTW - Guide to Weldability Carbon and Low Alloy Steels

AWS D8.7M:2005

AWS B2.1:2005