BS PD 8010-1:2015+A1:2016

BS PD 8010-1:2015+A1:2016 gives recommendations for and guidance on the design, selection, specification and use of materials, routeing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel. The principles of this part of PD 8010 apply to new pipelines and major modifications to existing pipelines.

It is not intended to replace or duplicate hydraulic, mechanical or structural design manuals.

This part of PD 8010 is applicable to pipelines intended for the conveyance of oil, gas, carbon dioxide and other substances that are hazardous by nature of being explosive, flammable, toxic, reactive, or liable to cause harm to persons or to the environment. It covers pipelines operating at temperatures between a range of -25 °C and +120 °C inclusive.

The extent of pipeline systems covered by this part of PD 8010 is shown in Figure 1.

NOTE Annex A shows the full range of onshore oil and gas pipeline systems covered by this part of PD 8010.

This part of PD 8010 does not give recommendations for subsea pipelines, which are covered in PD 8010-2.


Cross References:
ASME B16.5
ASME B16.9
ASME B16.11
ASME B16.20
ASME B16.21
ASME B16.47
ASME B31.3
ASME B31.8
ASME BPVC-VIII-1
ASTM A193/A193M 12b
ASTM A194/A194M 13
ASTM A312
ASTM A320/A320M 11a
ASTM A790
ASTM B423
ASTM B444
BS 3293
BS 3518-1
BS 3518-3
BS 3799
BS 4515-1
BS 4515-2
BS 4882
BS 7448
BS 7608
BS 7910
BS EN 10204
BS EN 10224
BS EN 13480-3
BS EN 60079-10-1
BS EN 60079-14
BS EN 62305
BS EN ISO 148-1
BS EN ISO 3183:2012
BS EN ISO 9606-1
BS EN ISO 15156
BS EN ISO 15607
BS EN ISO 15609
BS EN ISO 15610
BS EN ISO 15614
BS EN ISO 15653
BS EN ISO 21809-1
BS EN ISO 21809-2
BS ISO 1143
BS ISO 7005-1
BS ISO 10474
BS ISO 12107
ISO 15589-1
BS ISO 21809-4
ISO 14313
ISO 15590-1
ISO 15590-2
ISO 15590-3
ISO 21809-3
PD 5500
PD 8010-3:2009+A1:2013
API 5L:2012
API 5LC
API 5LD
API 6A
API RP 5L2
IGEM/TD/1 Edition 5:2012
MSS SP 44
NACE MR0175
NFPA 30
ASTM C177
ASTM E1049-85
ASTM H518
BS 4508
BS 5306
BS 5607
BS 5839
BS 6031
BS 6349-1-4
BS EN 437
BS EN 1992-1-1
BS EN 1594:2013
BS EN 10216-1
BS EN 10216-2
BS EN 10217-1
BS EN 10217-2
BS EN 10217-5
BS EN 12007
BS EN 14161
BS EN ISO 9000
BS EN ISO 9001
BS EN ISO 9004
BS EN ISO 14001
BS EN ISO 16708
BS EN ISO 80000-1
BS ISO 15649
DIN 30670
ISO 13623
PD 8010-2
PD 8010-4
PD 8010-5
API 1102
API RP 579
API RP 5L1
API RP 5LW
DNV-OS-F101:2013
DNV-RP-F110
DNV-RP-J202
IGEM/TD/1 Edition 5 Supplement 1:2012
NACE TM0284
BS 3618-3
BS 3618-8
BS 5911-1
BS 5911-120
BS 5949
ISO 4488
BS 6100-3
BS 6164
BS EN 295-7
BS EN 815
BS EN 12110
BS EN 12111
BS EN 12336
DNV-RP-B401:2010
DNV-RP-F102:2011
DNV-RP-F107:2010
ISO 21467
Construction (Design and Management) Regulations 2007
Deregulation (Pipe-lines) Order 1999
Electricity a


Incorporates the following:
Amendment, November 2016. Amends and replaces PD 8010-1:2015