BS PD CEN/TS 17332:2019

This document specifies existing methods for the determination of specific organic substances in aqueous eluates from leaching of construction products.

The following parameters are covered: pH, electrical conductivity, biocides, bisphenol A, BTEX, dioxins and furans, DOC, epichlorohydrin, mineral oil, nonylphenols, PAH, PBDE, PCB, dioxin-like PCB, PCP, phenols and phthalates.

NOTE 1 Methods still under development or available at national level only are listed in Annex B for certain amines, AOX, and biocidal and plant protection products.

NOTE 2 Methods that have not been validated for aqueous eluates from leaching of construction products, because no suitable material was available at the time of the robustness validation, only are listed in Annex B. This applies to organotin compounds.

The methods in this document come from different fields, mainly the analysis of water, and are applicable for the eluates from construction products. They are validated for eluates of the product types listed in Annex A.

NOTE 3 Construction products include, e.g. mineral-based products, bituminous products, wood-based products, polymer-based products and metals. This document includes analytical methods for all matrices except metals.

The selection of the method to be applied is based on the product matrix and the required sensitivity.

Cross References:
EN ISO 9377-2
ISO 28540
EN 16694
EN ISO 10523
EN 27888
EN ISO 15680
ISO 17858
EN 12673
CEN/TS 16637-2
EN ISO 14402
EN 15637
EN 1484
ISO 20595
ISO 18073
EN ISO 18856
EN ISO 18857-2
CEN/TS 16637-3
EN ISO 5667-3
EN 14207
EN 16687:2015
EN ISO 17294-1:2006
EN 71-11
CEN/TR 16220
ISO 5725-4
DIN 38407-35
CEN/TR 16045
ISO 5725-2
ISO 5725-6
ISO 5725-3
ISO 5725-5
EN ISO 15913
EN ISO 9562
ISO/TS 13530
ISO 5725-1
DIN 38407-36
EN 16192
CEN/TS 16637-1
EN ISO/IEC 17025
EN ISO 17353


All current amendments available at time of purchase are included with the purchase of this document.