BS PD IEC/TS 61936-2:2015

BS PD IEC/TS 61936-2:2015 provides, in a convenient form, common rules for the design and the erection of electrical power installations in systems with nominal voltages above 1,5 kV d.c., so as to provide safety and proper functioning for the use intended.

This technical specification does not apply to the design and erection of any of the following:

• overhead and underground lines between separate installations;
• electric railways;
• mining equipment and installations;
• installations on ships and off-shore installations;
• electrostatic equipment (e.g. electrostatic precipitators, spray-painting units);
• test sites;
• medical equipment, e.g. medical X-ray equipment;
• valve hall.

This technical specification does not apply to the design of factory-built, type-tested switchgear for which separate IEC standards exist.

This technical specification does not apply to the requirements for carrying out live working on electrical installations.

This technical specification does not apply to the design of factory-built, type-tested thyristor valves, VSC valves and switchgear for which separate IEC standards exist.


Cross References:
IEC 60060-1
IEC 60071-1
IEC 60071-2:1996
IEC 60071-5
IEC 60079-10-1
IEC 60079-10-2
IEC TS 60479-1:2005
IEC 60529
IEC TR 61000-5-2
IEC 61936-1:2010
IEC 61936-1:2010/AMD1:2014
IEC 62271-1:2007
IEC 62271-1:2007/AMD1:2011
CISPR 18-1
CISPR 18-2
CISPR 18-3
IEC 60050
IEC 60633
IEC 60068
IEC 60076-2
IEC 60364-4-41
IEC 60700-1
IEC 60721-2-2
IEC 60721-2-3
IEC 60721-2-4
IEC 60721-2-6
IEC 60721-2-7
IEC TR 60919
IEC 60949
IEC TR 62001
IEC/IEEE 65700-19-03:2014
IEC TS 62344
IEC TR 62543
IEC TR 62544
ISO 1996-1
IEEE 998:1996
ANSI/IEEE standard 1030
CIGRE Report 23-07:1991


All current amendments available at time of purchase are included with the purchase of this document.