BS PD IEC/TS 63014-1:2018

BS PD IEC/TS 63014-1:2018 is intended to provide an overall and consistent set of guidelines to facilitate the specification of equipment for the DC-side of a high-voltage direct current (HVDC) system using line-commutated converters. For point-to-point HVDC transmission systems, this document covers all DC-side equipment located between the converter valves and the DC overhead line or cable termination, excluding the converter valves themselves. For back-to-back HVDC systems, this document covers all DC-side equipment excluding the converter valves themselves. Throughout this publication, the terms 'direct voltage' and 'DC voltage' are used interchangeably, as are 'direct current' and 'DC current'.


Cross References:
IEC 61850-9-2
IEC 60353
IEC TS 62896
IEC 60633
IEC 62271-1
IEC 60060-1
IEC 61869-14
IEC 61869-9
IEC 61466
IEC 60871-1:2014
IEC 62271-102:2001
IEC 60871-4:2014
IEC 60076-6:2007
IEC 62271-100:2008
IEC/IEEE 65700-19-03:2014
IEC 62271-109:2008
IEC 60099-9:2014
IEC 62772
IEC 60383
IEC 60358-1
IEC 62217
IEC 60071-1
IEC TS 61936-2
IEC 60168
IEC 62231
IEC 60437
IEC Guide No. 111
IEC TS 61245
IEC 61869-15
IEC 61462
IEC 60071-5
IEC TS 60815-4
IEC 60050-151:2001
ASTM G48 - 11
CIGR? Technical Brochure JWG A3/B4.34
IEC 60700-1
IEC/TR 62001
CIGR? Technical Brochure 442
IEC 60700-2
CIGR? Technical Brochure No. 92:1994
IEC TR 62544
IEC 60529


All current amendments available at time of purchase are included with the purchase of this document.