BS PD ISO/TR 22100-3:2016

BS PD ISO/TR 22100-3:2016 describes the main ergonomic risk factors influencing the safety of machinery and gives a framework for incorporating them into the design of machines by the integration of important ergonomic principles relating to:

• avoiding stressful postures and movements during use of the machine;
• designing machines, and more especially hand-held and mobile machines, which can be operated easily;
• avoiding as far as possible noise, vibration, thermal effects;

NOTE 1 The health effects of noise, vibration and adverse thermal conditions are well-known and are not addressed here. However environmental factors can interact with machine design and risks arising from such influences are addressed in this document.

• avoiding linking the operator?s working rhythm to an automatic succession of cycles;
• providing local lighting on or in the machine;

NOTE 2 Lighting of the machine or of the surrounding workplace by the machine can have a significant impact on the safety of machine operation and this risk is addressed by this document.

• selecting, locating and identifying manual controls (actuators) so that they are clearly visible and identifiable and appropriately marked where necessary;
• selecting, designing and locating indicators, dials and visual display units.

The approach is based on ISO 12100 with its iterative process to identify significant hazards and reduce risks.

Relevant steps of this iterative process have been adapted to include ergonomic principles, and practical guidance is given to apply standards dealing with ergonomics which are relevant for machinery design.

This document is intended for use by standards writers and designers of machinery. It can be used when no relevant C-type standards are available.


Cross References:
ISO 12100:2010
ISO 1503
ISO 2860
ISO 2867
ISO 3411
ISO 4254-1
ISO 5353
ISO 6385:2004
ISO 6682
ISO 7250-1
ISO/TR 7250-2
ISO 7250-3
ISO 7731
ISO 9241-12
ISO/TR 9241-100
ISO 9241-110
ISO 9241-210
ISO 9241-300
ISO 9241-400
ISO 9355-1
ISO 9355-2
ISO 9355-3
ISO 9355-4
ISO 9921
ISO 10075-1
ISO 10075-2
ISO 10075-3
ISO 11064-1
ISO 11064-2
ISO 11064-3
ISO 11064-4
ISO 11064-5
ISO 11064-6
ISO 11064-7
ISO 11112
ISO 11161
ISO 11226
ISO 11228-1
ISO 11228-2
ISO 11228-3
ISO 11399
ISO 11428
ISO 11429
ISO/TR 12295
ISO 13732-1
ISO/TS 13732-2
ISO 13732-3
ISO 13857
ISO 14119
ISO/TR 14121-2:2012
ISO 14738
ISO 15265
ISO 15534-1
ISO 15534-2
ISO 15534-3
ISO 15535
ISO 15536-1
ISO 15537
ISO 16090-1:2014
ISO 20282-1
ISO 21281
ISO/TR 22411
ISO 23125
ISO 26800
ISO 28803:2012
ISO/IEC Guide 71
ISO Guide 78
IEC 60073
IEC 60204-1
IEC 60447
IEC 61310-1
IEC 61310-2
IEC 61310-3
EN 547-1
EN 547-2
EN 547-3
EN 614?1:2006+A1:2009
EN 614-2
CEN/TR 614-3
EN 842
EN 894-1
EN 894-2
EN 894-3
EN 894-4
EN 953
EN 981
EN 1005-1
EN 1005-2
EN 1005-3
EN 1005-4
EN 1837
EN 12464-1
EN 12464-2
EN 12643
EN 13490
EN 13557
EN 13586
ANSI B 11 TR 1
CR 1030-1


All current amendments available at time of purchase are included with the purchase of this document.