BS PD ISO/TS 17951-1:2016

Water quality. Determination of fluoride using flow analysis (FIA and CFA)-Method using flow injection analysis (FIA) and spectrometric detection after off-line distillation

BSI Group, 09/30/2016

Publisher: BS

File Format: PDF

$125.00$251.46


Published:30/09/2016

Pages:24

File Size:1 file , 1.8 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

BS PD ISO/TS 17951-1:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by flow injection analysis (FIA). Any insoluble or complexed fluoride is converted to fluoride ion by a manual distillation procedure from sulfuric/phosphoric acid. Fluoride ion in the distillate is measured using flow analysis with lanthanum alizarin complexone and spectrometric detection. This method is applicable to industrial waste waters, effluents, surface waters, ground waters, leachates. It is not recommended for drinking waters where a distillation step is not required. In this part of ISO 17951, two working ranges are described:
  • working range I: 0,1 mg/l to 1 mg/l;
  • working range II: 1 mg/l to 10 mg/l.
The specification of the calibration solutions are to be adapted accordingly.


Cross References:
ISO 3696
ISO 6353-2
ISO 8466-1
ISO 8466-2
ISO 5667-3
ISO 5725-2
JIS K 0170-6:2011


All current amendments available at time of purchase are included with the purchase of this document.

More BS standard pdf

BS PAS 1188-1:2014

BS PAS 1188-1:2014

Flood protection products. Specification-Building aperture products

$64.00 $129.54

BS PD CEN ISO/TR 22007-5:2014

BS PD CEN ISO/TR 22007-5:2014

Plastics. Determination of thermal conductivity and thermal diffusivity-Results of interlaboratory testing of poly(methyl methacrylate) samples

$156.00 $312.42

BS 8609:2014

BS 8609:2014

Natural gas. Calculation of carbon dioxide emission factors from composition

$85.00 $170.18

BS 5656-3:2014

BS 5656-3:2014

Safety rules for the construction and installation of escalators and moving walks-Examination and test of new moving walks before putting into service. Specification for means of determining compliance with BS EN 115-1:2008+A1:2010

$135.00 $271.78