CSA B1800-15

B1800-15 - Thermoplastic non-pressure piping compendium

Preface

This is the fifth edition in the form of a compendium of the CSA B181 and CSA B182 series of Standards, published as CSA B1800, Thermoplastic nonpressure piping compendium. It supersedes the previous editions of the compendium, published in 2011 and 2006 under the same title, and published in 2002 and 1999 under the title Plastic nonpressure pipe compendium. It consists of the following Standards:

• the third edition of CSA B181.0, Definitions, general requirements, and methods of testing for thermoplastic nonpressure piping, which supersedes the previous edition published in 2011;


• the tenth edition of CSA B181.1, Acrylonitrile-butadiene-styrene (ABS) drain, waste, and vent pipe and pipe fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1996, 1990, 1985, 1973, and 1967 under the title ABS drain, waste, and vent pipe and pipe fittings;


• the eleventh edition of CSA B181.2, Polyvinylchloride (PVC) and chlorinated polyvinylchloride (CPVC) drain, waste, and vent pipe and pipe fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1996, 1990, 1987, 1985, 1973, and 1967 under the title PVC drain, waste, and vent pipe and pipe fittings;


• the seventh edition of CSA B181.3, Polyolefin and polyvinylidene fluoride (PVDF) laboratory drainage systems, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1986, and 1971 under the title Polyolefin laboratory drainage systems;


• the seventh edition of CSA B181.5, Coextruded acrylonitrile-butadiene-styrene/polyvinylchloride (ABS/PVC) drain, waste, and vent pipe, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1995, and 1994 under the title Coextruded ABS/PVC drain, waste, and vent pipe;


• the eleventh edition of CSA B182.1, Plastic drain and sewer pipe and pipe fittings, which supersedes editions published in 2011, 2006, 2002, 1999, 1996, 1992, 1987, 1983, 1977, and 1967;


• the eighth edition of CSA B182.2, PSM type polyvinylchloride (PVC) sewer pipe and fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1995, 1990, and 1983 under the title PVC sewer pipe and fittings (PSM type);


• the ninth edition of CSA B182.4, Profile polyvinylchloride (PVC) sewer pipe and fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1997, 1992, 1990, and 1983 under the title Profile PVC sewer pipe and fittings;


• the sixth edition of CSA B182.6, Profile polyethylene (PE) sewer pipe and fittings for leak-proof sewer applications, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, and 1992 under the title Profile polyethylene sewer pipe and fittings for leak-proof sewer applications;


• the fourth edition of CSA B182.8, Profile polyethylene (PE) storm sewer and drainage pipe and fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002 under the title Profile polyethylene storm sewer and drainage pipe and fittings;


• the seventh edition of CSA B182.11, Standard practice for the installation of thermoplastic drain, storm, and sewer pipe and fittings, which supersedes editions published in 2011 and 2006 under the same title, and published in 2002, 1999, 1995, and 1967 under the title Recommended practice for the installation of thermoplastic drain, storm, and sewer pipe and fittings; and


• the second edition of CSA B182.13, Profile polypropylene (PP) sewer pipe and fittings for leak-proof sewer applications which supersedes the previous edition published in 2011; and


• the first editions of CSA B182.14, Profile steel reinforced polyethylene (SRPE) storm sewer pipe and fittings, and CSA B182.15, Profile steel reinforced polyethylene (SRPE) sewer pipe and fittings, which now form part of the B1800 series of Standards.

----------------------------------------------------------------------------------

B181.0-15 - Definitions, general requirements, and methods of testing for thermoplastic nonpressure piping

Scope

1.1
This Standard covers thermoplastic nonpressure piping, including

(a) drain, waste, and vent pipe and pipe fittings;

(b) sewer and storm pipe and pipe fittings; and

(c) accessories such as factory-assembled expansion joints, closet flanges, backwater valves, and cleanouts.

1.2
This Standard specifies general requirements for compounds and for manufactured pipe and pipe fittings, the relevant test methods, and marking requirements.

1.3
This Standard is intended to be used in conjunction with one of the other Standards in the CSA B181 or CSA B182 series to form a complete Standard for a particular product.

1.4
In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard.

Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.

Notes to tables and figures are considered part of the table or figure and may be written as requirements.

Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

----------------------------------------------------------------------------------

B181.1-15 - Acrylonitrile-butadiene-styrene (ABS) drain, waste, and vent pipe and pipe fittings

Scope

This Standard specifies requirements for acrylonitrile-butadiene-styrene (ABS) drain, waste, and vent (DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, and backwater valves.

Notes:

(1) Recommended installation practices for ABS-DWV pipe are specified in Annex A. Following these practices will help ensure proper installation and optimum service life.

(2) The maximum pressure used to test DWV installations should be 100 kPa (see Clause A.5.2).

----------------------------------------------------------------------------------

B181.2-15 - Polyvinylchloride (PVC) and chlorinated polyvinylchloride (CPVC) drain, waste, and vent pipe and pipe fittings

Scope

This Standard specifies requirements for polyvinylchloride (PVC) and chlorinated polyvinylchloride (CPVC) drain, waste, and vent (DWV) pipe, pipe fittings, and accessories such as factory-assembled expansion joints, closet flanges, backwater valves, and fire-stop fittings*.

*The fire stop is for use in fire separations only. It can be subject to code requirements not covered in this Standard. See the definition of "Fire-stop fitting" in Clause 3.1 of CSA B181.0.

Notes:

(1) Recommended installation practices for PVC-DWV pipe are specified in Annex A. Following these practices will help ensure proper installation and optimum service life.

(2) The maximum pressure used to test DWV installations should be 100 kPa (see Clause A.5.2).

--------------------