CSA B401.2:21

Preface:

This is the first edition of CSA B401.2, Propane vehicle maintenance facilities code.

CSA Group acknowledges that the development of this Code was made possible, in part, by the financial support of Natural Resources Canada.

This Code has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.

Scope:

1.1 Inclusions
This Code applies to the portions of a motor vehicle maintenance facility where propane-fuelled vehicles are maintained, repaired, or stored during maintenance or repair, including ancillary areas and systems. This applies to where the fuel system is for motive power of the vehicle.

1.2 Exclusions
This Code does not apply to
a) motor vehicle repair procedures;
b) parking facilities;
c) other fuels used for vehicles; or
d) propane when used for other purposes such as cooking, space, or water heating.
Note: The requirements for the storage, handling, and transferring of propane can be found in CSA B149.2.

1.3 Purpose
The purpose of this Code is to provide reasonable means to manage the risks associated with the maintenance and repair of vehicles fuelled with propane inside motor vehicle maintenance facilities.

1.4 Terminology

1.4.1 Fuelling and refueling
The terms "fuelling" and "refuelling" are used interchangeably in this Code.

1.4.2 Propane and hydrocarbons
Where the term "propane" is used, the requirements of this Code include, and apply equally to, any material that is composed predominantly of any of the following hydrocarbons or a mixture of them: propane, propylene, butane (normal butane or isobutane), and butylenes.

1.5 Units of record
The values given in SI units are the units of record for the purposes of this Code. The values given in parentheses are for information and comparison only.
Notes:
1) CSA B149.5 can be used as a guide when converting Imperial units to metric units.
2) Less than 1 m will be shown in mm.
3) 1 m or more will be shown in m to the nearest 0.1 m.
4) Pressures will be rounded to the nearest whole value using traditional rounding conventions.
5) Where the word "gallon" is used in this Code, it indicates a U.S. gallon equivalent to 3.785 L water capacity.

1.6 Gauge pressure
All references to pressure throughout this Code are to be considered gauge pressures, unless otherwise specified.

1.7 Mandatory language
In this Code, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Code; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Code. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.