CSA C22.2 NO. 60335-2-48:20

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters (Adopted IEC 60335-2-48:2002, edition 4:2002 consolidated with amendment 1:2008 and amendment 2:2017, with Canadian deviations)

CSA Group, 03/01/2020

Publisher: CSA

File Format: PDF

$130.00$260.00


Published:01/03/2020

Pages:148

File Size:1 file , 2.7 MB

Note:This product is unavailable in Russia, Ukraine, Belarus

Preface:

This is the third edition of CSA C22.2 No. 60335-2-48, Household and similar electrical appliances — Safety — Part 2-48: Particular requirements for commercial electric grillers and toasters, which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 60335-2-48 (edition 4:2002 consolidated with Amendment 1:2008 and Amendment 2:2017). It supersedes the previous edition published in 2001 as CAN/CSA-E60335-2-48 (adopted IEC 60335-2-48:2000). It also replaces the requirements for commercial electric grillers and toasters found in CSA C22.2 No. 109-17, Commercial cooking appliances. It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code.

This Standard is intended to be used in conjunction with CAN/CSA-C22.2 No. 60335-1:16, Household and similar electrical appliances — Safety — Part 1: General requirements (adopted IEC 60335-1:2010+A1:2013, with Canadian deviations).

This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.

Scope:

This International Standard deals with the safety of electrically operated commercial grillers and toasters not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances.

Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard.

NOTE 101 These appliances are used for the commercial processing of food, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc.

The electrical part of appliances making use of other forms of energy is also within the scope of this standard.

As far as is practicable, this standard deals with the common hazards presented by these types of appliances.

NOTE 102 Attention is drawn to the fact that
  • for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary;
  • in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities;
  • for appliances intended to be used outdoors, additional requirements may be necessary.
NOTE 103 This standard does not apply to
  • appliances designed exclusively for industrial purposes;
  • appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);
  • appliances for continuous mass production of food;
  • griddles and griddle grills (IEC 60335-2-38).

More CSA standard pdf

CSA PLUS 4013 (1st ed. pub 2010)

CSA PLUS 4013 (1st ed. pub 2010)

TECHNICAL GUIDE : Development, interpretation and use of rainfall intensity-duration-frequency (IDF) information: Guideline for Canadian water resources practitioners

$52.00 $105.00

CSA C22.2 No. 49-10

CSA C22.2 No. 49-10

Flexible Cords and Cables (Tri-National standard, with UL 62 and ANCE NMX-J-436)

$291.00 $582.00

CSA PLUS 4011-10

CSA PLUS 4011-10

Technical guide: Infrastructure in permafrost: A guideline for climate change adaptation

$54.00 $108.00

CSA Z245.20 SERIES-10

CSA Z245.20 SERIES-10

Plant-applied external coatings for steel pipe, Includes Update No. 1 (2011), No. 2 (2012)

$234.00 $469.00