• CSA Z240 RV SERIES-08 (R2013)

CSA Z240 RV SERIES-08 (R2013)

Recreational Vehicles, Includes Update No. 1 (2008), Update No. 2 (2008), Update No. 3 (2009), Update No. 4 (2011)

CSA Group, 03/01/2008

Publisher: CSA

File Format: PDF

$150.00$300.00


Published:01/03/2008

Pages:132

File Size:1 file , 2.3 MB

Note:This product is unavailable in Russia, Ukraine, Belarus

This PDF includes update #1.

Preface

This is the third consolidated edition of the CSA Z240 RV Series of Standards, Recreational vehicles. It supersedes the previous editions published in 1999 and 1986.

-----------------------------------------------

Z240.0.2-08

1 Scope

1.1
This Standard specifies dimensional and safety requirements for recreational vehicles. Its purpose is to specify minimum criteria for providing a degree of protection against loss of life from fire and explosion.

1.2
The CSA Z240 RV Series of Standards does not apply to park model trailers.
Note: Park model trailers are covered by the CAN/CSA-Z241 Series of Standards.

1.3
In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

1.4
The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

-----------------------------------------------

Z240.1.2-08

1 Scope

1.1
This Standard specifies vehicular requirements for recreational vehicles, except motor homes, and covers couplings, tongues, and A-frames, lighting (for slide-in campers only), glazing materials, and running gear.

1.2
This Standard includes performance tests for the following:
(a) coupling strength;
(b) photometric and mechanical performance of lighting equipment;
(c) optical and strength properties of glazing material; and
(d) service brake performance.

1.3
Cargo transportation space that is an integral part of a recreational vehicle and intended for transporting or storing livestock, vehicles (including motorcycles), snow machines, or watercraft is not prohibited by this Standard.

1.4
In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

1.5
The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

-----------------------------------------------

Z240.3.2-08

1 Scope

1.1
This Standard sets the minimum installation requirements and material standards for plumbing systems in recreational vehicles.

1.2
In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

1.3
The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

-----------------------------------------------

Z240.4.2-08

1 Scope

1.1
This Standard applies to the factory installation of propane appliances, accessories, and equipment in recreational vehicles.
Note: CAN/CSA-B149.1 should be consulted for installations not covered in this Standard.

1.2
In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

1.3
The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

-----------------------------------------------

Z240.6.2-08/C22.2 No. 148-08

1 Scope

1.1
This Standard specifies electrical requirements for recreational vehicles that are intended to be connected by a cord and attachment plug to a source of electrical supply not exceeding 250 V between conductors or 150 V to ground in accordance with rules of the Canadian Electrical Code, Part I.

1.2
This Standard does not apply to 6 or 12 V battery-operated vehicular lighting and brake wiring systems specified in CSA Z240.1.2, provided that the conductors of such a system are not or cannot come in contact with the conductors of the higher voltage system.

1.3
The requirements of this Standard are based on the Canadian Electrical Code, Part I (see also Clause 4).

1.4
In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

1.5
The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

More CSA standard pdf

CSA C22.2 NO. 60335-2-107:20

CSA C22.2 NO. 60335-2-107:20

Household and similar electrical appliances - Safety - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (Binational standard with ANSI/OPEI 60335-2-107-2020), Includes Update No. 1 (2020)

$205.00 $410.00

CSA C22.2 NO. 37:20

CSA C22.2 NO. 37:20

Decorative lighting products, Includes Errata (2021)

$160.00 $320.00

CSA B44:19/ASME A17.1-2019

CSA B44:19/ASME A17.1-2019

Safety code for elevators and escalators (Binational standard with ASME A17.1)

$195.00 $390.00

CSA C22.2 NO. 139:19

CSA C22.2 NO. 139:19

Electrically Operated Valves, Includes Update No. 1 (2023)

$130.00 $260.00