IEC 60079-10-1 Ed. 1.0 b:2008

Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres

International Electrotechnical Commission, 12/09/2008

Publisher: IEC

File Format: PDF

$169.00$339.00


Published:09/12/2008

Pages:135

File Size:1 file , 1.6 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 60079-10-1:2008 is concerned with the classification of areas where flammable gas or vapour or mist hazards may arise and may then be used as a basis to support the proper selection and installation of equipment for use in a hazardous area. It is intended to be applied where there may be an ignition hazard due to the presence of flammable gas or vapour, mixed with air under normal atmospheric conditions, but it does not apply to
a) mines susceptible to firedamp;
b) the processing and manufacture of explosives;
c) areas where a hazard may arise due to the presence of combustible dusts or fibres;
d) catastrophic failures which are beyond the concept of abnormality;
e) rommos used for medial purposes;
f) domestic premises.
This first edition of IEC 60079-10-1 cancels and replaces the fourth edition of IEC 60079-10, published in 2002, and constitutes a technical revision. The significant technical changes with respect to the previous edition are:
- introduction of Annex D which deals with explosion hazard from flammable mists generated by the release under pressure of high flash point liquids;
- introduction of Clause A.3 (release rate) which gives thermodynamic equations for release rate with a number of examples for estimating release rate of fluids and gases.

More IEC standard pdf

IEC 61967-2 Ed. 1.0 b:2005

IEC 61967-2 Ed. 1.0 b:2005

Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions - TEM cell and wideband TEM cell method

$95.00 $190.00

IEC 60598-2-24 Ed. 1.0 b:1997

IEC 60598-2-24 Ed. 1.0 b:1997

Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures

$22.00 $44.00

IEC 61068-3-1 Ed. 2.0 b:1995

IEC 61068-3-1 Ed. 2.0 b:1995

Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms

$12.00 $25.00

IEC 60938-1 Ed. 2.0 b:1999

IEC 60938-1 Ed. 2.0 b:1999

Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification

$129.00 $259.00