IEC 60317-0-1 Ed. 4.1 b:2019

Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire CONSOLIDATED EDITION

International Electrotechnical Commission, 08/20/2019

Publisher: IEC

File Format: PDF

$186.00$373.00


Published:20/08/2019

Pages:140

File Size:1 file , 2.3 MB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 60317-0-1:2019 specifies general requirements of enamelled round copper winding wires with or without bonding layer. The range of nominal conductor diameters is given in the relevant specification sheet. This fourth edition cancels and replaces the third edition published in 2008. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- revision to the definition of nominal conductor dimension;
- new subclause containing general notes on winding wire, formerly a part of the scope;
- revision to elongation requirements in Table 4;
- revisions to Clause 13, Breakdown voltage, to include new requirements for intermediate wire diameters;
- revision to continuity of insulation requirements in Table 13;
- revision to the introduction of Annex A;
- revision to B.2 of Annex B;
- revision to Table C.1 of Annex C. Keywords: requirements of enamelled round copper winding wires

This publication is to be read in conjunction withthe IEC 60851 series.

More IEC standard pdf

IEC 60601-2-37 Amd.1 Ed. 1.0 en:2004

IEC 60601-2-37 Amd.1 Ed. 1.0 en:2004

Amendment 1 - Medical electrical equipment - Part 2-37: Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment

$27.00 $54.00

IEC 60169-16 Amd.1 Ed. 1.0 b:1996

IEC 60169-16 Amd.1 Ed. 1.0 b:1996

Amendment 1 - Radio-frequency connectors. Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (Type N)

$33.00 $67.00

IEC 60974-10 Amd.1 Ed. 1.0 b:2004

IEC 60974-10 Amd.1 Ed. 1.0 b:2004

Amendment 1 - Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

$8.00 $17.00

IEC 60041 Ed. 3.0 b COR.1:1996

IEC 60041 Ed. 3.0 b COR.1:1996

Corrigendum 1 - Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines

$126.00 $252.99