• IEC 60332-3-25 Ed. 1.0 b:2000

IEC 60332-3-25 Ed. 1.0 b:2000

Tests on electric cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D

International Electrotechnical Commission, 10/09/2000

Publisher: IEC

File Format: PDF

$30.00$61.00


Published:09/10/2000

Pages:25

File Size:1 file , 250 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

Specifies method of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. The test is intended for type approval testing. The requirements for the selection of cables for testing are given. The flame spread is measured as the extent of damage of the cable sample. This procedure may be used to demonstrate the cable's ability to limit flame spread. Covers category D and relates only to small cables of overall diameter 12 mm or smaller installed on the test ladder to achieve a nominal total volume of non-metallic material of 0,5 l/m of test sample. The flame application time is 20 min. The method of mounting uses the front of the standard ladder in touching formation only. The category is intended for use with small cables where very low volumes of non-metallic material are required to be evaluated. A recommended performance requirement is also given. Has the status of a group safety publication in accordance with IEC Guide 104.

More IEC standard pdf

IEC 61148 Ed. 1.0 b CORR1:1996

IEC 61148 Ed. 1.0 b CORR1:1996

Corrigendum 1 - Terminal markings for valve device stacks and assemblies and for power convertor equipment

$126.00 $252.56

IEC 61690-2 Ed. 1.0 en:2000

IEC 61690-2 Ed. 1.0 en:2000

Electronic design interchange format (EDIF) - Part 2: Version 4 0 0. (This publication is available in electronic HTML format only)

$221.00 $443.00

IEC 60317-0-5 Ed. 1.2 b:2000

IEC 60317-0-5 Ed. 1.2 b:2000

Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire CONSOLIDATED EDITION

$41.00 $82.00

IEC 60807-2 Amd.1 Ed. 2.0 b:1996

IEC 60807-2 Amd.1 Ed. 2.0 b:1996

Amendment 1 - Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types

$6.00 $13.00