IEC 60335-2-34 Ed. 5.1 en:2015

Household and similar electrical appliances - Safety - Part 2-34:Particular requirements for motor-compressors CONSOLIDATED EDITION

International Electrotechnical Commission, 05/05/2015

Publisher: IEC

File Format: PDF

$221.00$443.00


Published:05/05/2015

Pages:87

File Size:1 file , 670 KB

Note:This product is unavailable in Ukraine, Russia, Belarus

IEC 60335-2-34:2012+A1:2015(E) deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V for single-phase motor-compressors and 480 V for other motor-compressors. Examples of equipment which contain motor-compressors are:
- refrigerators, food freezers and ice makers (IEC 60335-2-24);
- air-conditioners, electric heat pumps and dehumidifiers (IEC 60335-2-40);
- commercial dispensing appliances and vending machines (IEC 60335-2-75);
- factory-built assemblies for transferring heat in applications for refrigerating, air-conditioning or heating purposes or a combination of such purposes.
This standard does not supersede the requirements of standards relevant to the particular appliance in which the motor-compressor is used. However, if the motor-compressor type used complies with this standard, the tests for the motor-compressor specified in the particular appliance standard may not need to be made in the particular appliance or assembly. If the motor-compressor control system is associated with the particular appliance control system, additional tests may be necessary on the final appliance. Keywords: Motor compressor, hermetic; semi-hermetic

This publication is to be read in conjunction with IEC 60335-1:2010. This consolidated version consists of the fifth edition (2012) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.

More IEC standard pdf

IEC 61156-1-1 Ed. 1.0 b:2001

IEC 61156-1-1 Ed. 1.0 b:2001

Multicore and symmetrical pair/quad cables for digital communications - Part 1-1: Capability Approval - Generic specification

$25.00 $51.00

IEC 61660-2 Ed. 1.0 b:1997

IEC 61660-2 Ed. 1.0 b:1997

Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects

$139.00 $278.00

IEC 61156-2-2 Ed. 1.0 b:2001

IEC 61156-2-2 Ed. 1.0 b:2001

Multicore and symmetrical pair/quad cables for digital communications - Part 2-2: Horizontal floor wiring - Capability Approval - Sectional specification

$12.00 $25.00

IEC 61156-4-2 Ed. 1.0 b:2001

IEC 61156-4-2 Ed. 1.0 b:2001

Multicore and symmetrical pair/quad cables for digital communications - Part 4-2: Riser cables - Capability approval - Sectional specification

$12.00 $25.00